VOLVO
ECM-P010068 - Mass or Volume Air Flow A Circuit. Algorithm Based Failures. Event information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)
Pokaż modele wg rocznika i silnika (12)
- Volvo S60 (2011–)2011Tylko silnik: B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Tylko silnik: B4204T7
- Volvo S80 (2007–)2010Tylko silnik: B4204T6
- Volvo S80 (2007–)2011–2014Tylko silnik: B4204T6, B4204T7
- Volvo V60 (2011–)2011Tylko silnik: B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Tylko silnik: B4204T7
- Volvo V70 (2008–)2010Tylko silnik: B4204T6
- Volvo V70 (2008–)2011Tylko silnik: B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Tylko silnik: B4204T7
- Volvo XC60 (2009–)2010Tylko silnik: B4204T6
- Volvo XC60 (2009–)2011–2012Tylko silnik: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Tylko silnik: B4204T7
Co oznacza ten kod błędu?
This is an event-driven code, meaning an information code that does not point to a fault in the module where it is active. It is stored when the air flow sensor signal is wrong during driving. The code is a knock-on effect of another fault, so the underlying fault is repaired first. It normally does not need clearing, because it disappears once the conditions no longer apply.
Możliwe przyczyny
- Loose connection or corrosion in the connections
- Contact resistance in the connector terminals on the mass air flow sensor
- Damaged mass air flow sensor
- Dirty mass air flow sensor
- Air duct has come loose between the mass air flow sensor and the throttle body
Co możesz zrobić
- 1Read the other fault codes stored in the control module and look for air flow or intake faults, since the underlying fault should be repaired first
- 2Check that the connectors at the mass air flow sensor are fully engaged and free from corrosion
- 3Look for cracks and loose clamps on the air duct between the mass air flow sensor and the throttle body
- 4Check whether the mass air flow sensor is dirty
- 5If the code comes back after the underlying fault is repaired, have a workshop check the mass air flow sensor
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.