VOLVO
ECM-P010121 - Mass or Volume Air Flow Circuit Range/Performance. General Signal Failures. Signal too low
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
3 modeleS60 (2011–), S80 (2007–), V70 (2008–)
Pokaż modele wg rocznika i silnika (9)
- Volvo S60 (2011–)2011–2012Tylko silnik: B5254T5
- Volvo S80 (2007–)2007–2008Tylko silnik: B5254T6
- Volvo S80 (2007–)2009Tylko silnik: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Tylko silnik: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Tylko silnik: B5254T10
- Volvo V70 (2008–)2008Tylko silnik: B5254T6
- Volvo V70 (2008–)2009Tylko silnik: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Tylko silnik: B5254T10, B5254T11
- Volvo V70 (2008–)2012Tylko silnik: B5254T10
Co oznacza ten kod błędu?
The ECM works out the air mass it expects from several parameters and compares that with the value from the mass air flow sensor. The code is stored when the air mass correction factor becomes too high while the lambda adaptation is above or below a set value. While the fault is present, calculated boost and air mass values are used and parts of the emission control are switched off.
Możliwe przyczyny
- Contact resistance and corrosion in the mass air flow sensor connector terminals
- Air leak in the intake system
- Blocked intake system
- Damaged mass air flow sensor
Co możesz zrobić
- 1Read and note the code, clear it and road test to see whether it returns
- 2Check that the connector at the mass air flow sensor is fully engaged and free from corrosion
- 3Look for leaks and cracks in the hoses and joints between the mass air flow sensor and the throttle body
- 4Look for blockages in the intake system, for example dirt on the throttle or a clogged air filter
- 5If the fault remains after the intake system has been checked, have a workshop check the mass air flow sensor
Objawy, które możesz zauważyć1
- Eco indicator lamp lit
Na co może wpływać usterka3
- Calculated boost pressure and calculated air mass are used
- Rear lambda sensor control is switched off
- Misfire diagnosis is switched off
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.