Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-P013116
    VOLVO

    ECM-P013116 - O2 Sensor Circuit Low Voltage (Bank 1 Sensor 1). General Electrical Failures. Circuit voltage below threshold

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    5 modeli

    S60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)

    Pokaż modele wg rocznika i silnika (12)
    • Volvo S60 (2011–)2011Tylko silnik: B4204T6, B4204T7
    • Volvo S60 (2011–)2012–2014Tylko silnik: B4204T7
    • Volvo S80 (2007–)2010Tylko silnik: B4204T6
    • Volvo S80 (2007–)2011–2014Tylko silnik: B4204T6, B4204T7
    • Volvo V60 (2011–)2011Tylko silnik: B4204T6, B4204T7
    • Volvo V60 (2011–)2012–2014Tylko silnik: B4204T7
    • Volvo V70 (2008–)2010Tylko silnik: B4204T6
    • Volvo V70 (2008–)2011Tylko silnik: B4204T6, B4204T7
    • Volvo V70 (2008–)2012–2014Tylko silnik: B4204T7
    • Volvo XC60 (2009–)2010Tylko silnik: B4204T6
    • Volvo XC60 (2009–)2011–2012Tylko silnik: B4204T6, B4204T7
    • Volvo XC60 (2009–)2013–2015Tylko silnik: B4204T7

    Co oznacza ten kod błędu?

    This code means the voltage from the front oxygen sensor (bank 1, sensor 1) is too low while driving. It can be caused by the signal or ground cable being short-circuited to ground, or by a damaged front oxygen sensor.

    Możliwe przyczyny

    • Short-circuit to ground in the signal cable
    • Short-circuit to ground in the ground lead
    • Damaged front heated oxygen sensor (HO2S)

    Co możesz zrobić

    1. 1Read the fault code status with the ignition on and check whether the fault is active. Then clear the code and road test the vehicle
    2. 2With the connector unplugged at the oxygen sensor, use a multimeter to check that the signal and ground cables are not short-circuited to ground
    3. 3Check the connectors at the oxygen sensor for contact resistance and oxidation
    4. 4If the fault remains after the wiring has been checked, have a workshop try a new oxygen sensor

    Objawy, które możesz zauważyć1

    • The Check engine light comes on or behaves abnormally

    Na co może wpływać usterka2

    • Front oxygen sensor control is switched off
    • Catalyst diagnostics are switched off

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.