Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-P013416
    VOLVO

    ECM-P013416 - O2 Sensor Circuit No Activity Detected (Bank 1 Sensor 1). General Electrical Failures. Circuit voltage below threshold

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    5 modeli

    S60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)

    Pokaż modele wg rocznika i silnika (12)
    • Volvo S60 (2011–)2011Tylko silnik: B4204T6, B4204T7
    • Volvo S60 (2011–)2012–2014Tylko silnik: B4204T7
    • Volvo S80 (2007–)2010Tylko silnik: B4204T6
    • Volvo S80 (2007–)2011–2014Tylko silnik: B4204T6, B4204T7
    • Volvo V60 (2011–)2011Tylko silnik: B4204T6, B4204T7
    • Volvo V60 (2011–)2012–2014Tylko silnik: B4204T7
    • Volvo V70 (2008–)2010Tylko silnik: B4204T6
    • Volvo V70 (2008–)2011Tylko silnik: B4204T6, B4204T7
    • Volvo V70 (2008–)2012–2014Tylko silnik: B4204T7
    • Volvo XC60 (2009–)2010Tylko silnik: B4204T6
    • Volvo XC60 (2009–)2011–2012Tylko silnik: B4204T6, B4204T7
    • Volvo XC60 (2009–)2013–2015Tylko silnik: B4204T7

    Co oznacza ten kod błędu?

    Although the code is named for a low voltage, it is set when the signal from the front oxygen sensor in bank 1 is outside its permitted operating range, or when the sensor's pre-heating voltage disturbs the signal. The engine control module (ECM) monitors the sensor signal while driving and only sets the code once the test has started and the conditions are met.

    Możliwe przyczyny

    • Signal wire shorted to the pre-heating circuit
    • Ground wire shorted to the pre-heating circuit
    • Damaged front oxygen sensor

    Co możesz zrobić

    1. 1Read the code, clear it and road test the car to see whether it comes back
    2. 2Use a multimeter to check that the wires to the oxygen sensor are not shorted to each other, especially the signal wire against the pre-heating wires
    3. 3Check that the ground wire to the oxygen sensor is not shorted to the pre-heating circuit
    4. 4If you have a diagnostic tool: read the oxygen sensor signal in live data with the engine running and check that it is not stuck outside the normal range
    5. 5If the wiring is intact, replace the front oxygen sensor

    Objawy, które możesz zauważyć1

    • Check engine light (MIL) on

    Na co może wpływać usterka2

    • Front oxygen sensor control is switched off
    • Catalytic converter diagnostics are disabled

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.