Co oznacza kod błędu ECM-P013598?

Diagnostyka i definicja kodu błędu dla ECM-P013598 (Volvo C30 (2007–2013), Volvo S40 (2004–2013), Volvo S60 (2011–)). Zamów naprawę w OBD Tuning.

VOLVO

ECM-P013598 - O2 Sensor Heater Circuit (Bank 1 Sensor 1). Component Failures. Component or system over temperature

Układ

Sterownik silnika (ECM)

Modele Volvo, których dotyczy ten kod błędu

Dotyczy następujących modeli:

9 modeli

C30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)

Pokaż modele wg rocznika i silnika (9)

Co oznacza ten kod błędu?

The engine control module (ECM) monitors the heater in the front oxygen sensor in bank 1. The code indicates that the heater or its control circuit has become too hot, and the ECM sets it when the signal to the heater is incorrect. The ECM uses the sensor signal to control the fuel/air mixture.

Możliwe przyczyny

Contact resistance or oxidation in the connections
Open circuit or short circuit in the wiring
Damaged oxygen sensor
Damaged engine control module (ECM)

Co możesz zrobić

1Read the code, clear it and road test the car to see whether it comes back
2Check that the fuse for the oxygen sensor heater is intact
3Check the connectors at the oxygen sensor for contact resistance and oxidation; do not use rust solvent spray or grease
4Use a multimeter to check that the wires to the sensor heater have no open circuit and are not shorted
5If the connectors and wiring are intact, replace the front oxygen sensor; if you suspect the engine control module is damaged, have a workshop check it

Objawy, które możesz zauważyć1

Check engine light (MIL) on

Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.