VOLVO
ECM-P013A00 - O2 Sensor Slow Response - Rich to Lean (Bank 1 and Sensor 2). General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
10 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Pokaż modele wg rocznika i silnika (39)
- Volvo S60 (2011–)2011Tylko silnik: B4204T6, B4204T7, B5254T5, B6304T4
- Volvo S60 (2011–)2012Tylko silnik: B4204T7, B5254T5, B6304T4
- Volvo S60 (2011–)2013Tylko silnik: B4204T7, B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2014Wszystkie silniki oprócz: B4164T, B4164T2, B4164T3, D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Wszystkie silniki oprócz: B4164T, B4164T2, B4164T3, D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2010Tylko silnik: B4204T6, B6304T2, B6324S, B6324S2, B8444S
- Volvo S80 (2007–)2011Tylko silnik: B4204T6, B4204T7, B6304T4, B6324S4, B6324S5, B8444S
- Volvo S80 (2007–)2012Tylko silnik: B4204T6, B4204T7, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2013Tylko silnik: B4204T6, B4204T7, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2014Wszystkie silniki oprócz: B4164T, B4164T2, D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Wszystkie silniki oprócz: B4164T, D4162T, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Tylko silnik: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Tylko silnik: B4204T11, B5204T8, B5204T9, D4204T14
- Volvo V40 Cross Country (2013–)2013–2014Tylko silnik: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 Cross Country (2013–)2015Wszystkie silniki oprócz: B4164T, D4162T, D5204T6
- Volvo V60 (2011–)2011Tylko silnik: B4204T6, B4204T7, B6304T4
- Volvo V60 (2011–)2012Tylko silnik: B4204T7, B6304T4
- Volvo V60 (2011–)2013Tylko silnik: B4204T7, B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Tylko silnik: B4204T11, B4204T12, B4204T15, B4204T7, B4204T9, B5204T8, B5204T9, B5254T12, B6304T4, D4204T5
- Volvo V60 (2011–)2015Tylko silnik: B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5, D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2010Tylko silnik: B4204T6, B6304T2, B6324S, B6324S2
- Volvo V70 (2008–)2011Tylko silnik: B4204T6, B4204T7, B6304T4, B6324S5
- Volvo V70 (2008–)2012Tylko silnik: B4204T7, B6304T4, B6324S5
- Volvo V70 (2008–)2013Tylko silnik: B4204T7, B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2014Tylko silnik: B4204T11, B4204T7, B5204T9, B6304T4, B6324S5, D4204T5
- Volvo V70 (2008–)2015Tylko silnik: B4204T11, B5204T9, B6304T4, D4204T5
- Volvo XC60 (2009–)2010Wszystkie silniki oprócz: D5244T10, D5244T14, D5244T16
- Volvo XC60 (2009–)2011Wszystkie silniki oprócz: D5204T2, D5244T10, D5244T16
- Volvo XC60 (2009–)2012Wszystkie silniki oprócz: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013Tylko silnik: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Wszystkie silniki oprócz: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015Wszystkie silniki oprócz: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2010Tylko silnik: B6304T2, B6324S, B6324S2
- Volvo XC70 (2008–)2011–2013Tylko silnik: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Tylko silnik: B4204T11, B6304T4, B6324S4, B6324S5, D4204T5
- Volvo XC90 (2003–)2010Tylko silnik: B8444S
- Volvo XC90 (2003–)2011Tylko silnik: B6324S5, B8444S
- Volvo XC90 (2003–)2012–2014Tylko silnik: B6324S5
Co oznacza ten kod błędu?
This is an event-controlled information code, and it does not always mean a real fault. The engine control module (ECM) follows how well the rear oxygen sensor in bank 1 keeps up when the mixture switches from rich to lean. The sensor may react too slowly at the switch, and this is only checked in certain driving cases with fuel cut-off.
Możliwe przyczyny
- Contact resistance or oxidation in the connections
- Damaged or dirty rear oxygen sensor
- Damaged middle oxygen sensor, on cars with three oxygen sensors
Co możesz zrobić
- 1If the car runs normally, nothing needs to be done; read the code and clear it
- 2Check the connector to the rear oxygen sensor for contact resistance and oxidation; do not use rust solvent spray or grease
- 3Road test the car, preferably with some decelerations where the accelerator is fully released, and read the code again
- 4If you have a diagnostic tool: check in live data that the rear sensor signal changes when the accelerator is released
- 5If the code returns and the car behaves differently, have a workshop check the oxygen sensor control
Objawy, które możesz zauważyć1
- Check engine light (MIL) on
Na co może wpływać usterka1
- The engine control module uses a calculated value for the mixture
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.