VOLVO
ECM-P019121 - Fuel Rail Pressure Sensor A Circuit Range/Performance. General Signal Failures. Signal too low
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
7 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Pokaż modele wg rocznika i silnika (20)
- Volvo S60 (2011–)2011Tylko silnik: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Tylko silnik: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Tylko silnik: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Tylko silnik: B4204T6
- Volvo S80 (2007–)2011Tylko silnik: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Tylko silnik: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Tylko silnik: B4164T
- Volvo V40 (2013–)2013Tylko silnik: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Tylko silnik: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Tylko silnik: B4164T
- Volvo V60 (2011–)2011Tylko silnik: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Tylko silnik: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Tylko silnik: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Tylko silnik: B4204T6
- Volvo V70 (2008–)2011Tylko silnik: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Tylko silnik: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Tylko silnik: B4164T, B4164T2
- Volvo XC60 (2009–)2010Tylko silnik: B4204T6
- Volvo XC60 (2009–)2011–2012Tylko silnik: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Tylko silnik: B4204T7
Co oznacza ten kod błędu?
The control module (ECM) monitors the pressure on the high-pressure side of the fuel system. The code is set when the pressure from the sensor is unreasonably low, which may be caused by a leak in the fuel system, a damaged check valve on the low-pressure side of the pump, or a fault in the sensor or its wiring.
Możliwe przyczyny
- Leak in the fuel system
- Contact resistance or oxidation in the connections
- Signal wire shorted to voltage
- Open circuit in the signal wire or the signal earth wire
- Damaged fuel pressure sensor
- Damaged check valve on the low-pressure side of the fuel pump
Co możesz zrobić
- 1If there are other fault codes in the engine control system, deal with those first, as they may be the root cause
- 2Look for leaks, such as wet patches, on the hoses and connections on the high-pressure side
- 3Check the connector at the fuel pressure sensor on the high-pressure side for damage, oxidation and short circuits
- 4If you have a diagnostic tool: read the fuel pressure in live data straight after the ignition is switched on, and see whether it drops quickly when the engine is cold
- 5If the fault remains, a workshop should check the fuel pump, the check valve and the fuel pressure sensor
Objawy, które możesz zauważyć5
- The engine does not start or is hard to start, especially when cold
- Uneven idle
- The engine hesitates or runs unevenly while driving
- Poor performance and lack of power
- The Check engine lamp lights up or behaves abnormally
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.