Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-P019124
    VOLVO

    ECM-P019124 - Fuel Rail Pressure Sensor "A" Circuit Range/Performance. General Signal Failures. Signal stuck high

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    8 modeli

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Pokaż modele wg rocznika i silnika (8)
    • Volvo S60 (2011–)2014–2015Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
    • Volvo S80 (2007–)2014–2015Tylko silnik: B4204T11, B4204T12, B4204T15
    • Volvo V40 (2013–)2015Tylko silnik: B4204T11
    • Volvo V40 Cross Country (2013–)2015Tylko silnik: B4204T11
    • Volvo V60 (2011–)2014–2015Tylko silnik: B4204T11, B4204T12, B4204T15, B4204T9
    • Volvo V70 (2008–)2014–2015Tylko silnik: B4204T11
    • Volvo XC60 (2009–)2014–2015Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
    • Volvo XC70 (2008–)2014–2015Tylko silnik: B4204T11

    Co oznacza ten kod błędu?

    The control module (ECM) monitors the pressure on the high-pressure side of the fuel system with the fuel pressure sensor. The code is set when the signal from the sensor stays at a constant high level instead of varying. The sensor is integrated with the fuel temperature sensor, and the fault concerns the signal from it.

    Możliwe przyczyny

    • Damaged fuel pressure sensor

    Co możesz zrobić

    1. 1Read and clear the code, then start the engine to see whether it returns
    2. 2Check the connector at the fuel pressure sensor for damage, oxidation and looseness
    3. 3If you have a diagnostic tool: read the fuel pressure in live data with the ignition on and see whether the value stays at a high level
    4. 4If the fault remains, a workshop should check the fuel pressure sensor, as it is the damaged part according to the cause

    Objawy, które możesz zauważyć2

    • The Check engine lamp lights up or behaves abnormally
    • Message in the display together with a warning symbol

    Na co może wpływać usterka2

    • A fixed fuel pressure value is used
    • The fuel pump is controlled with a constant signal

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.