VOLVO
ECM-P019300 - Fuel Rail Pressure Sensor A Circuit High. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Ten kod błędu ma różne znaczenie w zależności od modelu, rocznika lub silnika. Wybierz znaczenie, które dotyczy Twojego samochodu.
Dotyczy następujących modeli:
12 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (41)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Tylko silnik: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Wszystkie silniki oprócz: B5254T7
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011Tylko silnik: D4162T, D5204T2, D5244T10
- Volvo S60 (2011–)2012Tylko silnik: D4162T, D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013–2014Tylko silnik: D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Tylko silnik: D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2009Tylko silnik: D5244T10
- Volvo S80 (2007–)2010Tylko silnik: D5244T10, D5244T14, D5244T19
- Volvo S80 (2007–)2011Tylko silnik: D5204T2, D5244T10
- Volvo S80 (2007–)2012Tylko silnik: D4162T, D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013–2014Tylko silnik: D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Tylko silnik: D4162T, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Tylko silnik: D4162T, D5204T4, D5204T6
- Volvo V40 (2013–)2015Tylko silnik: D4162T, D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Tylko silnik: D4162T, D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Tylko silnik: D4162T, D5204T6
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011Tylko silnik: D4162T, D5204T2, D5244T10
- Volvo V60 (2011–)2012Tylko silnik: D4162T, D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013Tylko silnik: D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2014Tylko silnik: D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2015Tylko silnik: D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23, D82PHEV, D87PHEV
- Volvo V70 (2008–)2009Tylko silnik: D5244T10
- Volvo V70 (2008–)2010Tylko silnik: D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2011Tylko silnik: D5204T2, D5244T10
- Volvo V70 (2008–)2012Tylko silnik: D4162T, D5204T3, D5244T11, D5244T15
- Volvo V70 (2008–)2013Tylko silnik: D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T17
- Volvo V70 (2008–)2014Tylko silnik: D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo V70 (2008–)2015Wszystkie silniki oprócz: B4164T, B4164T2, B4204T11, B5204T9, B6304T4, D4204T5
- Volvo XC60 (2009–)2010Tylko silnik: D5244T10, D5244T14, D5244T16
- Volvo XC60 (2009–)2011Tylko silnik: D5204T2, D5244T10, D5244T16
- Volvo XC60 (2009–)2012Tylko silnik: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013Wszystkie silniki oprócz: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Tylko silnik: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015Tylko silnik: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2010Tylko silnik: D5244T10, D5244T14, D5244T16
- Volvo XC70 (2008–)2011Tylko silnik: D5204T2, D5244T10, D5244T16
- Volvo XC70 (2008–)2012–2013Wszystkie silniki oprócz: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Tylko silnik: D5204T3, D5244T11, D5244T12, D5244T15, D5244T17
Co oznacza ten kod błędu?
The control module (ECM) monitors the signal from the fuel pressure sensor and compares it with the pressure that is expected. The code is set when the signal from the sensor is too high, and the control module then uses a calculated value instead. The fault can cause a loss of power while driving.
Możliwe przyczyny
- Contact resistance or oxidation in the connectors
- Signal wire shorted to voltage
- Damaged fuel pressure sensor
- Damaged fuel pressure regulator valve
Co możesz zrobić
- 1Read and clear the code, then start the engine to see whether it returns
- 2Check that the fuses are intact
- 3Check the connector at the fuel pressure sensor for contact resistance and oxidation
- 4Use a multimeter to check that the signal wire is not in contact with battery voltage
- 5If you have a diagnostic tool: read the pressure in live data during a test drive and see whether the value is high when the engine is loaded
- 6If the fault remains, a workshop should check the sensor, the regulator valve and the wiring
Objawy, które możesz zauważyć2
- Poor performance and lack of power while driving
- Message in the display together with a warning symbol
Na co może wpływać usterka2
- The control module uses a calculated value
- Engine torque may be limited
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.