VOLVO
ECM-P019621 - Engine Oil Temperature Sensor "A" Range/Performance. General Signal Failures. Signal too low
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (8)
- Volvo S60 (2011–)2014–2015Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo S80 (2007–)2014–2015Tylko silnik: B4204T11, B4204T12, B4204T15, D4204T5
- Volvo V40 (2013–)2015Tylko silnik: B4204T11, D4204T14
- Volvo V40 Cross Country (2013–)2015Tylko silnik: B4204T11, D4204T14
- Volvo V60 (2011–)2014–2015Tylko silnik: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo V70 (2008–)2014–2015Tylko silnik: B4204T11, D4204T5
- Volvo XC60 (2009–)2014–2015Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo XC70 (2008–)2014–2015Tylko silnik: B4204T11, D4204T5
Co oznacza ten kod błędu?
The control module (ECM) checks the engine oil temperature against the air, coolant and outside temperatures. The code is set when the oil temperature differs too much from these readings and the signal is too low.
Możliwe przyczyny
- Contact resistance in the connector at the sensor
- Signal wire shorted to earth
- Damaged sensor for oil pressure and oil temperature
Co możesz zrobić
- 1Check that the fuses are intact
- 2Read and clear the code, then start the engine to see whether it returns
- 3Check the connector at the combined oil pressure and oil temperature sensor for contact resistance and oxidation
- 4Use a multimeter to check that the signal wire is not shorted to earth (the body)
- 5If you have a diagnostic tool: compare the oil temperature in live data with the outside temperature after a long stop, and see whether they are close
- 6If the fault remains, a workshop should check the sensor
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.