VOLVO
ECM-P01B600 - Alternative Fuel Rail Temperature Sensor Circuit Low. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (8)
- Volvo S60 (2011–)2014–2015Tylko silnik: D4204T5
- Volvo S80 (2007–)2014–2015Tylko silnik: D4204T5
- Volvo V40 (2013–)2015Tylko silnik: D4204T14
- Volvo V40 Cross Country (2013–)2015Tylko silnik: D4204T14
- Volvo V60 (2011–)2014–2015Tylko silnik: D4204T5
- Volvo V70 (2008–)2014–2015Tylko silnik: D4204T5
- Volvo XC60 (2009–)2014–2015Tylko silnik: D4204T5
- Volvo XC70 (2008–)2014–2015Tylko silnik: D4204T5
Co oznacza ten kod błędu?
The control module (ECM) receives the fuel temperature from the injectors over LIN communication and compares it with calibrated limits. The code is set when the temperature from the injector on cylinder 3 falls below the lowest permitted value, and the control module then uses the temperature from one of the other injectors instead.
Możliwe przyczyny
- Looseness or oxidation in the connections
- Damaged injector on cylinder 3
Co możesz zrobić
- 1If there are codes for missing or faulty communication with the injectors, fix those first, as this code is then a follow-on fault
- 2Check the injector connectors, especially on cylinder 3, for looseness and oxidation
- 3If you have a diagnostic tool: read the temperature from each injector in live data and see whether cylinder 3 is low compared with the others
- 4If no fault is found in these checks, the injector on cylinder 3 may need to be replaced, which is a workshop job
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Na co może wpływać usterka1
- The temperature from one of the other injectors is used instead
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.