VOLVO
ECM-P01C200 - Fuel Rail Pressure Sensor Circuit Intermittent/Erratic (Bank 2). General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (8)
- Volvo S60 (2011–)2014–2015Tylko silnik: D4204T5
- Volvo S80 (2007–)2014–2015Tylko silnik: D4204T5
- Volvo V40 (2013–)2015Tylko silnik: D4204T14
- Volvo V40 Cross Country (2013–)2015Tylko silnik: D4204T14
- Volvo V60 (2011–)2014–2015Tylko silnik: D4204T5
- Volvo V70 (2008–)2014–2015Tylko silnik: D4204T5
- Volvo XC60 (2009–)2014–2015Tylko silnik: D4204T5
- Volvo XC70 (2008–)2014–2015Tylko silnik: D4204T5
Co oznacza ten kod błędu?
The control module (ECM) compares the signal levels from the pressure sensors in the injectors on cylinders 1 and 4 with both the highest and the lowest permitted values. The code is set when the signal level for either of these two falls outside the limits. The signal is erratic.
Możliwe przyczyny
- Looseness or oxidation in the connections
- Faulty pressure sensor in the injector on cylinder 1
- Faulty pressure sensor in the injector on cylinder 4
Co możesz zrobić
- 1Read and clear the code, then start the engine to see whether it returns
- 2Check the connectors to the injectors on cylinders 1 and 4 for looseness and oxidation
- 3If you have a diagnostic tool: compare the pressure from the injectors on cylinders 1 and 4 with the others in live data and see whether either differs
- 4If the fault remains, a workshop with diagnostic equipment should check the pressure sensors in the injectors on cylinders 1 and 4
Objawy, które możesz zauważyć2
- The engine may stall at idle
- The engine may stall while driving
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.