VOLVO
ECM-P022B00 - Charge Air Cooler Bypass Control A Circuit Low. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
2 modeleS80 (2007–), V70 (2008–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
The ECM monitors the charge air cooler bypass valve and how it works. The fault is set when the signal from the valve's position sensor is too low, meaning the reading does not match the expected position.
Możliwe przyczyny
- Loose contact or oxidation in the connections
- Open circuit or short to ground in the supply to the position sensor
- Open circuit or short to ground in the signal wire to the position sensor
- Damaged bypass valve
Co możesz zrobić
- 1Read the code, clear it and road test to see whether it returns
- 2Check that the fuses are intact. Fuse locations are shown in the owner's manual
- 3Look at the connector at the bypass valve and its position sensor for loose connections and oxidation
- 4If you have a diagnostic tool: read the bypass valve position sensor in live data with the ignition on, and see whether the value changes when the valve is activated
- 5Use a multimeter to check that the supply wire to the position sensor is not broken and not shorted to ground
- 6If the fault remains, have a workshop check the bypass valve and its position sensor with diagnostic equipment
Objawy, które możesz zauważyć1
- The check engine lamp comes on or behaves abnormally
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.