Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-P02D300
    VOLVO

    ECM-P02D300 - Cylinder 4 Fuel Injector Offset Learning at Max Limit. General Failure Information. No sub type information

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    9 modeli

    C30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)

    Pokaż modele wg rocznika i silnika (9)
    • Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T
    • Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T
    • Volvo S60 (2011–)2011–2015Tylko silnik: D4162T
    • Volvo S80 (2007–)2012–2015Tylko silnik: D4162T
    • Volvo V40 (2013–)2013–2015Tylko silnik: D4162T
    • Volvo V40 Cross Country (2013–)2013–2015Tylko silnik: D4162T
    • Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T
    • Volvo V60 (2011–)2011–2015Tylko silnik: D4162T
    • Volvo V70 (2008–)2012–2015Tylko silnik: D4162T

    Co oznacza ten kod błędu?

    The engine control module (ECM) adjusts the fuel amount per cylinder to compensate for variations. For cylinder 4, the learned injection offset has reached its highest permitted level, and the code is stored when the need for adjustment exceeds the limit for how far fuel may be increased. The code is general.

    Możliwe przyczyny

    • Fault related to the injectors
    • Deal first with another fault code, if one is stored
    • Incorrectly programmed injector class
    • Incorrectly fitted injector
    • Leaking injector
    • Uneven or poor compression

    Co możesz zrobić

    1. 1Read the fault codes; if another fault code is stored, deal with it first, then drive and see whether this code returns
    2. 2Check the connector to the cylinder 4 injector, that it is firmly seated and free from oxidation
    3. 3Have a workshop check that the correct injector class is programmed and that the cylinder 4 injector is seated correctly and not leaking
    4. 4Have a workshop with diagnostic equipment measure the compression in cylinder 4, since uneven or poor compression may be behind it

    Objawy, które możesz zauważyć1

    • A noise from the engine, at any time or all the time

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.