VOLVO
ECM-P030092 - Random Misfire Detected. Component Failures. Performance or incorrect operation
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
7 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Pokaż modele wg rocznika i silnika (27)
- Volvo S60 (2011–)2011Wszystkie silniki oprócz: B6304T4, D4162T, D5204T2, D5244T10
- Volvo S60 (2011–)2012Tylko silnik: B4164T, B4164T2, B4164T3, B4204T7, B5254T5
- Volvo S60 (2011–)2013–2014Tylko silnik: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Tylko silnik: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2007–2008Tylko silnik: B5254T6
- Volvo S80 (2007–)2009Tylko silnik: B5254T6, B5254T8
- Volvo S80 (2007–)2010Tylko silnik: B4204T6, B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2011Tylko silnik: B4164T, B4204T6, B4204T7, B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Tylko silnik: B4164T, B4164T2, B4204T6, B4204T7, B5254T10
- Volvo S80 (2007–)2013–2014Tylko silnik: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Tylko silnik: B4164T
- Volvo V40 (2013–)2013Tylko silnik: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Tylko silnik: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Tylko silnik: B4164T
- Volvo V60 (2011–)2011Tylko silnik: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Tylko silnik: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Tylko silnik: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2008Tylko silnik: B5254T6
- Volvo V70 (2008–)2009Tylko silnik: B5254T6, B5254T8
- Volvo V70 (2008–)2010Tylko silnik: B4204T6, B5254T10, B5254T11
- Volvo V70 (2008–)2011Tylko silnik: B4164T, B4204T6, B4204T7, B5254T10, B5254T11
- Volvo V70 (2008–)2012Tylko silnik: B4164T, B4164T2, B4204T7, B5254T10
- Volvo V70 (2008–)2013–2014Tylko silnik: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Tylko silnik: B4164T, B4164T2
- Volvo XC60 (2009–)2010Tylko silnik: B4204T6
- Volvo XC60 (2009–)2011–2012Tylko silnik: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Tylko silnik: B4204T7
Co oznacza ten kod błędu?
If the engine control module (ECM) detects emission-related misfires on several cylinders, the fault code is stored. The code is linked to a cylinder-specific code that shows which cylinders misfire, and it has no fault tracing of its own.
Możliwe przyczyny
- Low fuel level
- The engine does not reach operating temperature between several cold starts
- Contaminated or incorrect fuel
- Air leak in the intake system
- Clogged or leaking injection valve
- Incorrect fuel pressure
Co możesz zrobić
- 1Read which cylinder-specific codes are present at the same time; they show which cylinders misfire
- 2Check that the fuel level is sufficient and that the correct fuel has been filled
- 3Check the intake system for leaks, such as hoses and connections with cracks or loose clamps
- 4After a repair: read the fault code and drive the car for a while to see that it does not return
- 5Have a workshop with diagnostic equipment check the fuel pressure, the compression and the injection valves
Objawy, które możesz zauważyć5
- The engine is hard to start and cranks slowly
- Uneven idle
- Reduced performance and lack of power
- The engine hesitates and runs roughly
- The Check engine light lights up or behaves abnormally
Na co może wpływać usterka3
- The catalytic converter diagnosis is switched off
- The leak diagnosis is switched off
- Lambda control is switched off
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.