Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-P030298
    VOLVO

    ECM-P030298 - Cylinder 2 Misfire Detected. Component Failures. Component or system over temperature

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    3 modele

    S60 (2011–), S80 (2007–), V70 (2008–)

    Pokaż modele wg rocznika i silnika (9)
    • Volvo S60 (2011–)2011–2012Tylko silnik: B5254T5
    • Volvo S80 (2007–)2007–2008Tylko silnik: B5254T6
    • Volvo S80 (2007–)2009Tylko silnik: B5254T6, B5254T8
    • Volvo S80 (2007–)2010–2011Tylko silnik: B5254T10, B5254T11, B5254T8
    • Volvo S80 (2007–)2012Tylko silnik: B5254T10
    • Volvo V70 (2008–)2008Tylko silnik: B5254T6
    • Volvo V70 (2008–)2009Tylko silnik: B5254T6, B5254T8
    • Volvo V70 (2008–)2010–2011Tylko silnik: B5254T10, B5254T11
    • Volvo V70 (2008–)2012Tylko silnik: B5254T10

    Co oznacza ten kod błędu?

    Misfires on cylinder 2 that can damage the catalytic converter are registered by the engine control module (ECM) shortly after the engine starts. It points to cylinder 2 and belongs to the overheating codes, because unburned fuel can make the catalytic converter too hot.

    Możliwe przyczyny

    • Low fuel level
    • The engine does not reach operating temperature between several cold starts
    • Poor fuel quality, for example summer fuel in winter
    • Clogged or leaking injection valve
    • Uneven compression
    • Incorrectly calculated ethanol content

    Co możesz zrobić

    1. 1Read the fault codes; codes for camshaft control should be traced first
    2. 2Check that the intake system does not leak and that the crankcase ventilation is clear
    3. 3Check that the fuel level is sufficient and that the fuel suits the season
    4. 4If you have a diagnostic tool: read the misfire counters for each cylinder in live data and see whether cylinder 2 differs
    5. 5Have a workshop with diagnostic equipment check the injection valve and the compression on cylinder 2

    Objawy, które możesz zauważyć5

    • The engine is hard to start and cranks slowly
    • Uneven idle
    • The engine lacks power and performs poorly
    • The engine hesitates, surges or runs roughly when driven
    • The Check engine light lights up or behaves abnormally

    Na co może wpływać usterka2

    • Rear oxygen sensor control is switched off
    • Lambda control is switched off

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.