VOLVO
ECM-P032500 - Knock Sensor 1 Circuit (Bank 1). General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
2 modeleS80 (2007–), V70 (2008–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
The engine control module (ECM) sets the fault code when knock sensor 1 on bank 1 delivers signals it judges to be faulty. The cause may be a break in the signal cable, a short circuit to ground or voltage, or a damaged knock sensor. It is the front knock sensor that is meant.
Możliwe przyczyny
- Break in the signal cable
- Signal cable short-circuited to ground
- Signal cable short-circuited to voltage
- Damaged knock sensor
Co możesz zrobić
- 1Read the fault code, clear it and test drive the car to see whether it returns
- 2Check the connector on the front knock sensor for play, contact resistance and oxidation
- 3Check the signal cable for breaks; with a multimeter, confirm that the cable has no contact with ground (the body) or with voltage
- 4If you have a diagnostic tool: read the knock signal from the front sensor in live data with the engine running and see whether it is missing or clearly off
- 5Have a workshop with diagnostic equipment replace the knock sensor if it is damaged
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.