VOLVO
ECM-P03362F - Crankshaft Position Sensor A Circuit Range/Performance. General Signal Failures. Signal erratic
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Pokaż modele wg rocznika i silnika (8)
- Volvo S80 (2007–)2007–2009Tylko silnik: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Tylko silnik: D4164T
- Volvo V70 (2008–)2008–2009Tylko silnik: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Tylko silnik: D4164T
- Volvo XC60 (2009–)2009Wszystkie silniki oprócz: B6304T2
- Volvo XC70 (2008–)2008Wszystkie silniki oprócz: B6324S
- Volvo XC70 (2008–)2009Tylko silnik: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Tylko silnik: D5244T18, D5244T5
Co oznacza ten kod błędu?
The engine control module (ECM) monitors the signal from the crankshaft position sensor while the engine runs. The fault is stored when the signal is missing or faulty, and it can be linked to engine speed being too high or to the sensor wiring. The signal is described as erratic, meaning it is not steady.
Możliwe przyczyny
- Too high engine speed
- Short circuit in the sensor wiring
Co możesz zrobić
- 1If you have a diagnostic tool, start the engine and read the fault status for the code.
- 2Check that the fuses are intact.
- 3With the ignition off, check that the sensor connector is secure and free from oxidation and contact resistance.
- 4Use a multimeter to check that the sensor wires are not shorted to ground (the body) or to supply voltage.
- 5Check that the sensor is correctly fitted in its position.
- 6If you have a diagnostic tool, follow the engine speed in live data while the engine runs and check whether the value rises or falls unexpectedly.
Objawy, które możesz zauważyć3
- Engine does not start but cranks
- Engine stalls
- Engine lacks power while driving
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.