VOLVO
ECM-P033902 - Crankshaft Position Sensor A Circuit Intermittent. General Failure Information. General signal failure
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
2 modeleS80 (2007–), V70 (2008–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
The fault is recorded as intermittent, meaning it comes and goes, and it may not be present right now. The engine control module (ECM) checks the signal from the crankshaft position sensor. The fault is stored when the signal is missing or faulty, and the cause can be the connections, the wiring or the sensor itself.
Możliwe przyczyny
- Contact resistance or oxidation in the connections
- Short circuit in the sensor wiring
- Sensor fitted incorrectly
- Damaged crankshaft position sensor
Co możesz zrobić
- 1If you have a diagnostic tool, start the engine and read the fault status. 'No fault found' means the fault is not active right now.
- 2Check that the fuses are intact.
- 3With the ignition off, check that the connector at the sensor is secure and free from oxidation and contact resistance.
- 4Use a multimeter to check that the sensor wires are not shorted to ground (the body) or to supply voltage, and that they have no open circuit.
- 5Check that the sensor is correctly fitted in the right position.
- 6If you have a diagnostic tool, follow the engine speed in live data during a test drive and check whether the value jumps.
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.