Co oznacza kod błędu ECM-P034062?

Diagnostyka i definicja kodu błędu dla ECM-P034062 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo S80 (2007–)). Zamów naprawę w OBD Tuning.

VOLVO

ECM-P034062 - Camshaft Position Sensor A Circuit (Bank 1 or single sensor). Algorithm Based Failures. Signal compare failure

Układ

Sterownik silnika (ECM)

Modele Volvo, których dotyczy ten kod błędu

Dotyczy następujących modeli:

3 modele

S60 (2011–), S80 (2007–), V70 (2008–)

Pokaż modele wg rocznika i silnika (9)

Co oznacza ten kod błędu?

The engine control module (ECM) compares the signals from the camshaft sensors for intake and exhaust. The fault is stored when the signal from both sensors is faulty or missing. It is always stored together with another code for the camshaft sensor signal, and that other code says more about the fault.

Możliwe przyczyny

Signal missing from the camshaft sensors
Incorrect circuit for the camshaft sensors

Co możesz zrobić

1Read both this code and the other camshaft sensor signal code with a diagnostic tool, and start with the one that says more about the fault.
2Check that the fuses are intact.
3With the ignition off, check that the connectors to the camshaft sensors are secure and free from oxidation and contact resistance.
4Use a multimeter to check that the wires to the camshaft sensors have no open circuit and are not shorted to ground or supply voltage.
5If the fault remains, have a workshop check that the camshaft sensors are correctly fitted and correctly connected.

Objawy, które możesz zauważyć2

Uneven idle
Poor performance

Na co może wpływać usterka3

Camshaft control is switched off
Diagnostics for camshaft control are switched off
Boost pressure is controlled using the basic setting

Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.