VOLVO
ECM-P034068 - Camshaft Position Sensor A Circuit (Bank 1 or single sensor). Algorithm Based Failures. Event information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)
Pokaż modele wg rocznika i silnika (12)
- Volvo S60 (2011–)2011Tylko silnik: B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Tylko silnik: B4204T7
- Volvo S80 (2007–)2010Tylko silnik: B4204T6
- Volvo S80 (2007–)2011–2014Tylko silnik: B4204T6, B4204T7
- Volvo V60 (2011–)2011Tylko silnik: B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Tylko silnik: B4204T7
- Volvo V70 (2008–)2010Tylko silnik: B4204T6
- Volvo V70 (2008–)2011Tylko silnik: B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Tylko silnik: B4204T7
- Volvo XC60 (2009–)2010Tylko silnik: B4204T6
- Volvo XC60 (2009–)2011–2012Tylko silnik: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Tylko silnik: B4204T7
Co oznacza ten kod błędu?
This is an event controlled code, meaning it shows an event and is intended as information. It does not point to a fault in the control module where it is active. The engine control module sets the code when it interprets the camshaft sensor signal as faulty, and the code disappears when the conditions no longer apply.
Możliwe przyczyny
- Another fault that this code is a follow-on to
Co możesz zrobić
- 1Read all the fault codes in the engine control module and see which ones relate to the camshaft sensor. Those are the ones to address first.
- 2Fix the root fault according to the code that was set first, then read the fault codes again with a diagnostic tool.
- 3This code is a consequence of other codes and does not need to be erased separately. It disappears when the conditions no longer apply.
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.