Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-P034162
    VOLVO

    ECM-P034162 - Camshaft Position Sensor A Circuit Range/Performance (Bank 1 or single sensor). Algorithm Based Failures. Signal compare failure

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    9 modeli

    C30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)

    Pokaż modele wg rocznika i silnika (9)
    • Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T
    • Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T
    • Volvo S60 (2011–)2011–2015Tylko silnik: D4162T
    • Volvo S80 (2007–)2012–2015Tylko silnik: D4162T
    • Volvo V40 (2013–)2013–2015Tylko silnik: D4162T
    • Volvo V40 Cross Country (2013–)2013–2015Tylko silnik: D4162T
    • Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T
    • Volvo V60 (2011–)2011–2015Tylko silnik: D4162T
    • Volvo V70 (2008–)2012–2015Tylko silnik: D4162T

    Co oznacza ten kod błędu?

    The ECM checks the camshaft sensor signal against the crankshaft sensor signal. The fault is stored when the module finds a faulty signal during the comparison. The code applies to the camshaft sensor on bank 1, or to the single sensor if the engine has only one.

    Możliwe przyczyny

    • Loose connections
    • Contact resistance or oxidation in the connections
    • Damaged camshaft sensor
    • Damaged crankshaft sensor

    Co możesz zrobić

    1. 1If you have a diagnostic tool, start the engine and read the fault status. 'No fault found' means the fault is not active right now.
    2. 2Check that the fuses are intact.
    3. 3With the ignition off, check that the connectors at the camshaft sensor and the crankshaft sensor are secure and free from oxidation.
    4. 4Check that the camshaft sensor and the crankshaft sensor are correctly fitted in their positions.
    5. 5If your diagnostic tool shows it, compare the camshaft sensor position in live data with the engine speed while the engine runs.
    6. 6If the fault returns, have a workshop check the sensors and their wiring.

    Objawy, które możesz zauważyć1

    • Engine does not start but cranks

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.