VOLVO
ECM-P034B00 - Crankshaft Position Sensor - Crankshaft Direction Incorrect. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (26)
- Volvo S60 (2011–)2011Tylko silnik: D4162T
- Volvo S60 (2011–)2012Tylko silnik: D4162T, D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013Tylko silnik: D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2014Wszystkie silniki oprócz: B4164T, B4164T2, B4164T3, B4204T7, B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2015Wszystkie silniki oprócz: B4164T, B4164T2, B4164T3, B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2012Tylko silnik: D4162T, D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013Tylko silnik: D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2014Tylko silnik: B4204T11, B4204T12, B4204T15, D4162T, D4204T5, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Wszystkie silniki oprócz: B4164T, B6304T4, B6324S4, B6324S5
- Volvo V40 (2013–)2013–2014Tylko silnik: D4162T, D5204T4, D5204T6
- Volvo V40 (2013–)2015Tylko silnik: B4204T11, D4162T, D4204T14, D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Tylko silnik: D4162T, D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Tylko silnik: B4204T11, D4162T, D4204T14, D5204T6
- Volvo V60 (2011–)2011Tylko silnik: D4162T
- Volvo V60 (2011–)2012Tylko silnik: D4162T, D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013Tylko silnik: D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2014Wszystkie silniki oprócz: B4164T, B4164T2, B4164T3, B4204T7, B5204T8, B5204T9, B5254T12, B6304T4
- Volvo V60 (2011–)2015Wszystkie silniki oprócz: B4164T, B4164T2, B4164T3, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5
- Volvo V70 (2008–)2012Tylko silnik: D4162T, D5204T3, D5244T11, D5244T15
- Volvo V70 (2008–)2013Tylko silnik: D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T17
- Volvo V70 (2008–)2014Wszystkie silniki oprócz: B4164T, B4164T2, B4204T7, B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2015Wszystkie silniki oprócz: B4164T, B4164T2, B5204T9, B6304T4
- Volvo XC60 (2009–)2012Tylko silnik: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013–2014Wszystkie silniki oprócz: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2015Wszystkie silniki oprócz: B4204T7, B5204T9, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2012–2015Wszystkie silniki oprócz: B6304T4, B6324S4, B6324S5
Co oznacza ten kod błędu?
The engine control module (ECM) calculates the crankshaft direction from the signals from the crankshaft sensor and the flywheel sensor. The fault is stored when the calculated direction is wrong, meaning the position recorded when the engine stopped does not match its actual position at start. It can occur in connection with automatic start/stop.
Możliwe przyczyny
- Contact resistance or oxidation in the connections
- Open circuit on the signal cable
- Damaged crankshaft sensor
- Damaged pulse wheel or flywheel
- Damaged cables or connectors
- Crankshaft sensor fitted incorrectly
Co możesz zrobić
- 1If you have a diagnostic tool, start the engine and read the fault status. 'Fault found' means a permanent fault.
- 2Check that the fuses are intact.
- 3With the ignition off, check that the connectors at the crankshaft sensor and the flywheel sensor are secure and free from oxidation.
- 4Use a multimeter to check that the signal wire from the crankshaft sensor has no open circuit.
- 5If your diagnostic tool shows it, read the crankshaft sensor signal in live data at engine start.
- 6If the fault returns, have a workshop check the pulse wheel, the flywheel and the sensors.
Objawy, które możesz zauważyć5
- Engine does not start, sometimes or every time
- Automatic engine start/stop does not work
- Car hesitates or jerks while driving
- Car lacks power, especially when pulling away from standstill
- Text message and yellow warning symbol shown in the display
Na co może wpływać usterka2
- The automatic engine start/stop function is switched off
- Maximum engine speed is limited
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.