ECM-P035613
VOLVO
ECM-P035613 - Ignition Coil F Primary/Secondary Circuit. General Electrical Failures. Circuit open
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
7 modeliS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Pokaż modele wg rocznika i silnika (10)
- Volvo S60 (2011–)2011–2014Tylko silnik: B6304T4
- Volvo S60 (2011–)2015Tylko silnik: B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2011–2015Tylko silnik: B6304T4, B6324S4, B6324S5
- Volvo V60 (2011–)2011–2014Tylko silnik: B6304T4
- Volvo V60 (2011–)2015Tylko silnik: B6304T3, B6304T4, B6304T5
- Volvo V70 (2008–)2011–2014Tylko silnik: B6304T4, B6324S5
- Volvo V70 (2008–)2015Tylko silnik: B6304T4
- Volvo XC60 (2009–)2011–2015Tylko silnik: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2011–2015Tylko silnik: B6304T4, B6324S4, B6324S5
- Volvo XC90 (2003–)2011–2014Tylko silnik: B6324S5
Co oznacza ten kod błędu?
The fault lies in the signal wire to ignition coil F, according to the code. The code is only stored once the fault has persisted over two or more driving cycles in a row, and it concerns the primary and secondary circuit of the coil.
Możliwe przyczyny
- Contact resistance and oxidation in the connections
- Open circuit in the signal wire
- Damaged ignition coil
Co możesz zrobić
- 1If you have a diagnostic tool, start the engine and read the fault status. 'Fault found' means the fault is permanent.
- 2Check that the fuses are intact.
- 3With the ignition off, check that the connector at ignition coil F is free from contact resistance and oxidation.
- 4Use a multimeter to check that the signal wire to ignition coil F has no open circuit.
- 5Check that the wiring to ignition coil F is not twisted, pinched or chafed.
- 6If the fault returns, have a workshop check ignition coil F and its diagnostic line.
Objawy, które możesz zauważyć4
- Engine lacks power while driving
- Car hesitates or jerks when slowing down
- Car hesitates or jerks at steady speed
- Car lacks power, especially when pulling away from standstill
Na co może wpływać usterka1
- Closed loop control of lambda is blocked
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.