VOLVO
ECM-P036500 - Camshaft Position Sensor B Circuit (Bank 1). General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
10 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Pokaż modele wg rocznika i silnika (44)
- Volvo S60 (2011–)2011–2012Tylko silnik: B5254T5, B6304T4
- Volvo S60 (2011–)2013Tylko silnik: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2014Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2015Wszystkie silniki oprócz: B4164T, B4164T2, B4164T3, D4162T, D4204T5, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2007Wszystkie silniki oprócz: D5244T4, D5244T5
- Volvo S80 (2007–)2008Tylko silnik: B5254T6, B6304T2, B6324S, B8444S
- Volvo S80 (2007–)2009Tylko silnik: B5254T6, B5254T8, B6304T2, B6324S, B8444S
- Volvo S80 (2007–)2010Tylko silnik: B5254T10, B5254T11, B5254T8, B6304T2, B6324S, B6324S2, B8444S
- Volvo S80 (2007–)2011Tylko silnik: B5254T10, B5254T11, B5254T8, B6304T4, B6324S4, B6324S5, B8444S
- Volvo S80 (2007–)2012Tylko silnik: B5254T10, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2013Tylko silnik: B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2014Tylko silnik: B4204T11, B4204T12, B4204T15, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2015Wszystkie silniki oprócz: B4164T, D4162T, D4204T5, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Tylko silnik: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Tylko silnik: B4204T11, B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2014Tylko silnik: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 Cross Country (2013–)2015Wszystkie silniki oprócz: B4164T, D4162T, D4204T14, D5204T6
- Volvo V60 (2011–)2011–2012Tylko silnik: B6304T4
- Volvo V60 (2011–)2013Tylko silnik: B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Tylko silnik: B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B6304T4
- Volvo V60 (2011–)2015Tylko silnik: B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008Tylko silnik: B5254T6, B6304T2, B6324S
- Volvo V70 (2008–)2009Tylko silnik: B5254T6, B5254T8, B6304T2, B6324S
- Volvo V70 (2008–)2010Tylko silnik: B5254T10, B5254T11, B6304T2, B6324S, B6324S2
- Volvo V70 (2008–)2011Tylko silnik: B5254T10, B5254T11, B6304T4, B6324S5
- Volvo V70 (2008–)2012Tylko silnik: B5254T10, B6304T4, B6324S5
- Volvo V70 (2008–)2013Tylko silnik: B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2014Tylko silnik: B4204T11, B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2015Tylko silnik: B4204T11, B5204T9, B6304T4
- Volvo XC60 (2009–)2009Tylko silnik: B6304T2
- Volvo XC60 (2009–)2010Tylko silnik: B6304T2, B6324S, B6324S2
- Volvo XC60 (2009–)2011–2013Tylko silnik: B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2015Wszystkie silniki oprócz: B4204T7, D4204T5, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2008Tylko silnik: B6324S
- Volvo XC70 (2008–)2009Tylko silnik: B6304T2, B6324S
- Volvo XC70 (2008–)2010Tylko silnik: B6304T2, B6324S, B6324S2
- Volvo XC70 (2008–)2011–2013Tylko silnik: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Tylko silnik: B4204T11, B6304T4, B6324S4, B6324S5
- Volvo XC90 (2003–)2005–2006Tylko silnik: B8444S
- Volvo XC90 (2003–)2007–2010Tylko silnik: B6324S, B8444S
- Volvo XC90 (2003–)2011Tylko silnik: B6324S5, B8444S
- Volvo XC90 (2003–)2012–2014Tylko silnik: B6324S5
Co oznacza ten kod błędu?
The code applies to the exhaust camshaft sensor on bank 1. The engine control module (ECM) reads the gear wheel on the camshaft through the sensor, and the fault is stored when the ECM counts too few segments over a set number of crankshaft revolutions. The code does not say which type of fault it is.
Możliwe przyczyny
- Open circuit in the signal wire
- Signal wire short circuit to ground
- Signal wire short circuit to supply voltage
- Damaged camshaft sensor
- Camshaft sensor in the wrong position
- Loose connection
Co możesz zrobić
- 1If you have a diagnostic tool, start the engine, raise the engine speed a few times and read the fault status. 'Fault found' means the fault is permanent.
- 2Check that the fuses are intact.
- 3With the ignition off, check the connector at the exhaust camshaft sensor on bank 1 for play, contact resistance and oxidation.
- 4Use a multimeter to check that the signal wire to the exhaust camshaft sensor on bank 1 is not shorted to ground or supply voltage and has no open circuit.
- 5Check that the camshaft sensor is correctly fitted in its position.
- 6If the fault returns, have a workshop check the camshaft sensor and its wiring.
Objawy, które możesz zauważyć2
- Engine is hard to start
- Check engine light is on or behaves abnormally
Na co może wpływać usterka1
- The ECM uses the crankshaft sensor signal instead
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.