VOLVO
ECM-P038113 - Glow Plug/Heater Indicator Circuit. General Electrical Failures. Circuit open
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Pokaż modele wg rocznika i silnika (6)
- Volvo S80 (2007–)2007–2009Tylko silnik: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Tylko silnik: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Wszystkie silniki oprócz: B6304T2
- Volvo XC70 (2008–)2008Wszystkie silniki oprócz: B6324S
- Volvo XC70 (2008–)2009Tylko silnik: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Tylko silnik: D5244T18, D5244T5
Co oznacza ten kod błędu?
The ECM sets this code when the signal for the glow plug lamp is interrupted. The fault concerns an open circuit, and although the code is named as a heater indicator circuit fault, it applies to the lamp in the instrument cluster (DIM).
Możliwe przyczyny
- Fault in the CAN network
- Fault in the instrument cluster (DIM)
Co możesz zrobić
- 1If you have a diagnostic tool, switch on the ignition and read the fault status. 'No fault found' means the fault is not active right now.
- 2Check that the fuses are intact.
- 3Switch on the ignition and look at the glow plug lamp in the instrument panel to see whether it lights and goes out normally.
- 4Read ECM-P038111, ECM-P038112 and ECM-P038119 with the diagnostic tool as well, since they may be related to this code.
- 5Check that the connectors in the CAN network are secure and not loose.
- 6If the fault returns, have a workshop trace the fault in the instrument cluster (DIM) and the CAN network.
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Na co może wpływać usterka1
- The glow plug lamp is switched off
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.