Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-P038119
    VOLVO

    ECM-P038119 - Glow Plug/Heater Indicator Circuit. General Electrical Failures. Circuit current above threshold

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    5 modeli

    S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

    Pokaż modele wg rocznika i silnika (6)
    • Volvo S80 (2007–)2007–2009Tylko silnik: D5244T4, D5244T5
    • Volvo V70 (2008–)2008–2009Tylko silnik: D5244T4, D5244T5
    • Volvo XC60 (2009–)2009Wszystkie silniki oprócz: B6304T2
    • Volvo XC70 (2008–)2008Wszystkie silniki oprócz: B6324S
    • Volvo XC70 (2008–)2009Tylko silnik: D5244T4, D5244T5
    • Volvo XC90 (2003–)2013–2014Tylko silnik: D5244T18, D5244T5

    Co oznacza ten kod błędu?

    The ECM drives the glow plug lamp over the CAN network to the driver information module (DIM) in the instrument cluster. A fault in the signal to that lamp sets the code: the current in the circuit is too high. The fault is mainly electrical.

    Możliwe przyczyny

    • Fault on the CAN network between the engine control module and the instrument cluster
    • Fault in the driver information module (DIM)
    • Fault codes ECM-P038111, ECM-P038112 and ECM-P038113 may be the cause, so read them at the same time

    Co możesz zrobić

    1. 1Check that the fuses are intact; their locations are in the instruction manual or the fuse chart
    2. 2Switch the ignition on and check whether the glow plug lamp in the instrument panel lights and goes out as normal
    3. 3Read and clear the fault code, switch the ignition on again and see whether it comes back
    4. 4If you have a diagnostic tool, read the fault status to see whether the code is active with the ignition on or only stored as an earlier fault
    5. 5Check that the connectors at the instrument cluster are secure and free from oxidation
    6. 6If the fault comes back, have a workshop trace the CAN network and the instrument cluster

    Objawy, które możesz zauważyć1

    • No noticeable symptoms for the driver

    Na co może wpływać usterka1

    • The glow plug lamp in the instrument panel is switched off

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.