ECM-P042268
VOLVO
ECM-P042268 - Main Catalyst Efficiency Below Threshold (Bank 1). Algorithm Based Failures. Event information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
6 modeliS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (9)
- Volvo S60 (2011–)2011–2014Tylko silnik: B6304T4
- Volvo S60 (2011–)2015Tylko silnik: B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2008–2009Tylko silnik: B6304T2
- Volvo V60 (2011–)2011–2014Tylko silnik: B6304T4
- Volvo V60 (2011–)2015Tylko silnik: B6304T3, B6304T4, B6304T5
- Volvo V70 (2008–)2008–2009Tylko silnik: B6304T2
- Volvo XC60 (2009–)2009–2010Tylko silnik: B6304T2
- Volvo XC60 (2009–)2011–2015Tylko silnik: B6304T4
- Volvo XC70 (2008–)2009Tylko silnik: B6304T2
Co oznacza ten kod błędu?
The code is event controlled and works as information. It does not mean that the control module where it is active has a fault. The ECM alternates the fuel mixture and compares the signal from the rear oxygen sensor, and the code is set when the rear sensor switches too fast, which is read as reduced efficiency of the main catalytic converter on bank 1.
Możliwe przyczyny
- No fault that needs repair lies behind the code
Co możesz zrobić
- 1The code has no troubleshooting of its own, so start with any other fault codes stored in the control module
- 2The code is tested at idle with a warm engine, and the car must have been moving first; drive it and let it idle to see whether it comes back
- 3If you have a diagnostic tool, read the fault status after the car has been driven and then idled with a warm engine
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.