Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-P048900
    VOLVO

    ECM-P048900 - Exhaust Gas Recirculation Control Circuit Low. General Failure Information. No sub type information

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    5 modeli

    S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

    Pokaż modele wg rocznika i silnika (11)
    • Volvo S80 (2007–)2007Tylko silnik: D5244T4, D5244T5
    • Volvo S80 (2007–)2008–2009Tylko silnik: D4204T, D5244T4, D5244T5
    • Volvo S80 (2007–)2010Tylko silnik: D4164T, D4204T
    • Volvo S80 (2007–)2011Tylko silnik: D4164T
    • Volvo V70 (2008–)2008–2009Tylko silnik: D4204T, D5244T4, D5244T5
    • Volvo V70 (2008–)2010Tylko silnik: D4164T, D4204T
    • Volvo V70 (2008–)2011Tylko silnik: D4164T
    • Volvo XC60 (2009–)2009Wszystkie silniki oprócz: B6304T2
    • Volvo XC70 (2008–)2008Wszystkie silniki oprócz: B6324S
    • Volvo XC70 (2008–)2009Tylko silnik: D5244T4, D5244T5
    • Volvo XC90 (2003–)2013–2014Tylko silnik: D5244T18, D5244T5

    Co oznacza ten kod błędu?

    The code concerns a signal for the EGR valve control that is too low. Its internal power stage drives the EGR motor, and the ECM checks that signal while the engine runs. A low signal can come from several faults in wires, connectors or the valve.

    Możliwe przyczyny

    • Contact resistance, oxidation or loose contact in the connectors and connections
    • Signal wire short-circuited to ground, or short-circuited to supply voltage
    • Damaged position sensor or damaged EGR valve
    • The EGR valve sticks, for example because of dirt or soot
    • Break in the supply or ground wire, or either of these wires short-circuited to ground or supply voltage
    • The wires to the EGR valve motor are short-circuited to supply voltage

    Co możesz zrobić

    1. 1Check that the fuses are intact. Their location is given in the owner's manual or on the fuse box cover
    2. 2With the ignition switched off, check the intake system for leaks and damage
    3. 3Clean the EGR valve of dirt and soot, and check that it does not bind
    4. 4Use a multimeter to check that the wires to the EGR valve have no break and are not short-circuited to ground or supply voltage
    5. 5If you have a diagnostic tool, activate the EGR valve and check whether the position sensor value changes. If it stays still after cleaning, the valve is probably damaged
    6. 6After replacement or repair, a workshop adapts the EGR valve. Clear the code and road test

    Objawy, które możesz zauważyć3

    • The check engine lamp comes on or behaves abnormally
    • Poor performance or the car lacks power
    • A red warning symbol and a message appear on the display

    Na co może wpływać usterka1

    • EGR control is lost

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.