VOLVO
ECM-P049B00 - Exhaust Gas Recirculation B Flow Insufficient Detected. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
2 modeleS80 (2007–), V70 (2008–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
The code indicates that too little exhaust gas is being recirculated through the EGR system, meaning exhaust gas recirculation is not working as it should. The engine control module (ECM) monitors EGR control and sets the code when a fault is found in the EGR valve or its wiring.
Możliwe przyczyny
- The EGR valve sticks because of dirt or soot
- The EGR valve is damaged
Co możesz zrobić
- 1Check that the fuses are intact. Their location is given in the owner's manual
- 2Clean the EGR valve of dirt and soot so that it can move freely
- 3If you have a diagnostic tool, activate the EGR valve and check that it does not bind
- 4Use a multimeter to check that the wires to the EGR valve have no break or short circuits
- 5Replace a damaged EGR valve, have a workshop adapt it, and clear the code
- 6After the work, road test and check that the car runs smoothly
Objawy, które możesz zauważyć3
- The car lacks power, especially when pulling away
- The car hesitates, surges or runs jerkily during acceleration, deceleration or steady speed
- A text message appears on the display
Na co może wpływać usterka1
- Engine torque may be limited
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.