VOLVO
ECM-P050B77 - Cold Start Ignition Timing Performance. Mechanical Failures. Commanded position not reachable
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelS60 (2011–)
Pokaż modele wg rocznika i silnika (1)
Co oznacza ten kod błędu?
This code concerns ignition timing control during a cold start. If the timing cannot be controlled as planned, the catalytic converter warms up too slowly. The fault always has another cause in the system and can also affect idle. The code never occurs alone, so diagnosis starts with the other codes.
Możliwe przyczyny
- Diagnosis is carried out via another fault code stored in the module
Co możesz zrobić
- 1The code never occurs alone, so read the fault codes in the engine control module and diagnose the other codes first
- 2If the idle control code is also present, follow its troubleshooting, as idle is most likely affected
- 3Clear the code once the other codes have been repaired, and road test the car
- 4If you have a diagnostic tool, read the idle speed in live data with the engine idling and see whether the value is steady
- 5If the code returns after the other codes are repaired, have a workshop with diagnostic equipment continue the diagnosis
Objawy, które możesz zauważyć1
- The eco lamp is on
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.