VOLVO
ECM-P052548 - Cruise Control Servo Control Circuit Range/Performance. System Internal Failures. Supervision software failure
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
7 modeliS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Pokaż modele wg rocznika i silnika (21)
- Volvo S60 (2011–)2011–2014Tylko silnik: B6304T4
- Volvo S60 (2011–)2015Tylko silnik: B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2007Tylko silnik: B6324S, B8444S
- Volvo S80 (2007–)2008–2009Tylko silnik: B6304T2, B6324S, B8444S
- Volvo S80 (2007–)2010Tylko silnik: B6304T2, B6324S2, B8444S
- Volvo S80 (2007–)2011Tylko silnik: B6304T4, B6324S4, B8444S
- Volvo S80 (2007–)2012–2015Tylko silnik: B6304T4, B6324S4
- Volvo V60 (2011–)2011–2014Tylko silnik: B6304T4
- Volvo V60 (2011–)2015Tylko silnik: B6304T3, B6304T4, B6304T5
- Volvo V70 (2008–)2008–2009Tylko silnik: B6304T2, B6324S
- Volvo V70 (2008–)2010Tylko silnik: B6304T2, B6324S2
- Volvo V70 (2008–)2011–2015Tylko silnik: B6304T4
- Volvo XC60 (2009–)2009Tylko silnik: B6304T2
- Volvo XC60 (2009–)2010Tylko silnik: B6304T2, B6324S2
- Volvo XC60 (2009–)2011–2015Tylko silnik: B6304T4, B6324S4
- Volvo XC70 (2008–)2008Tylko silnik: B6324S
- Volvo XC70 (2008–)2009Tylko silnik: B6304T2, B6324S
- Volvo XC70 (2008–)2010Tylko silnik: B6304T2, B6324S2
- Volvo XC70 (2008–)2011–2015Tylko silnik: B6304T4, B6324S4
- Volvo XC90 (2003–)2007–2010Tylko silnik: B6324S
- Volvo XC90 (2003–)2011–2014Tylko silnik: B6324S5
Co oznacza ten kod błędu?
The ECM has registered an internal fault while cruise control is active, and the fault lies in the engine control module itself. Cruise control is switched off for as long as the fault is active. After the engine control module has been reprogrammed or the battery has been replaced, the brake pedal must be pressed twice in quick succession before cruise control can be activated.
Możliwe przyczyny
- Damaged engine control module (ECM)
Co możesz zrobić
- 1Clear the code and start the car to see whether it returns
- 2If cruise control cannot be activated after the battery has been disconnected: press the brake pedal twice in quick succession
- 3If you have a diagnostic tool, read the status of the code in the engine control module with the ignition on and see whether the fault is still active
- 4Road test with cruise control and see whether it engages and holds speed
- 5If the code returns, have a workshop with diagnostic equipment check the engine control module, as it may need replacing
Objawy, które możesz zauważyć2
- Cruise control does not work at all
- Cruise control does not engage
Na co może wpływać usterka1
- Cruise control is switched off for as long as the fault is active
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.