VOLVO
ECM-P052C00 - Cold Start Camshaft Position Timing Over-Advanced (Bank 2). General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
2 modeleS80 (2007–), XC90 (2003–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
This code applies to bank 2 and is set when the camshaft sits further forward than the engine control module has requested during catalyst warm-up after a cold start. The fault may relate to engine oil quality, oil pressure, or parts of the VVT system: the control valve and the VVT unit.
Możliwe przyczyny
- Poor engine oil quality
- Low oil pressure
- Damaged camshaft control valve
- Damaged VVT unit
Co możesz zrobić
- 1Check that the engine oil is clean and of the right quality, as contaminants can damage the VVT unit
- 2Have a workshop check the engine oil pressure
- 3If you have a diagnostic tool, read the actual and requested camshaft position for bank 2 in live data during warm-up
- 4Clear the code and road test the car with the engine cold to see whether it returns
- 5If the code returns, have a workshop with diagnostic equipment check the control valve and the VVT unit on bank 2
Objawy, które możesz zauważyć2
- Uneven idle
- The engine misfires
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.