Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-P055600
    VOLVO

    ECM-P055600 - Brake Booster Pressure Sensor Circuit Range/Performance. General Failure Information. No sub type information

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    9 modeli

    C30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)

    Pokaż modele wg rocznika i silnika (9)
    • Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T
    • Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T
    • Volvo S60 (2011–)2011–2015Tylko silnik: D4162T
    • Volvo S80 (2007–)2012–2015Tylko silnik: D4162T
    • Volvo V40 (2013–)2013–2015Tylko silnik: D4162T
    • Volvo V40 Cross Country (2013–)2013–2015Tylko silnik: D4162T
    • Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T
    • Volvo V60 (2011–)2011–2015Tylko silnik: D4162T
    • Volvo V70 (2008–)2012–2015Tylko silnik: D4162T

    Co oznacza ten kod błędu?

    The ECM monitors the vacuum pressure sensor, which measures the negative pressure in the brake booster. If the vacuum is too low while driving, automatic engine start/stop is not allowed. The fault may be a loose or oxidized connector, or a damaged sensor.

    Możliwe przyczyny

    • Loose or oxidized connector contact
    • Damaged vacuum pressure sensor

    Co możesz zrobić

    1. 1Check that the vacuum pressure sensor connector is secure and not oxidized
    2. 2Check that the hose between the engine and the brake booster is secure and not kinked or damaged
    3. 3If you have a diagnostic tool, read the vacuum pressure in live data with the engine running and see whether the value is steady
    4. 4Clear the code and start the engine to see whether it returns
    5. 5Do not work on the brake booster yourself; if the fault returns, have a workshop check the vacuum pressure sensor with diagnostic equipment

    Objawy, które możesz zauważyć1

    • Automatic engine start/stop does not work, both while driving and at idle

    Na co może wpływać usterka2

    • The module uses a vacuum value that corresponds to no vacuum
    • Automatic engine start/stop is switched off

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.