VOLVO
ECM-P055B00 - Engine Oil Pressure Sensor/Switch "B" Circuit Range/Performance. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (8)
- Volvo S60 (2011–)2014–2015Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo S80 (2007–)2014–2015Tylko silnik: B4204T11, B4204T12, B4204T15, D4204T5
- Volvo V40 (2013–)2015Tylko silnik: B4204T11, D4204T14
- Volvo V40 Cross Country (2013–)2015Tylko silnik: B4204T11, D4204T14
- Volvo V60 (2011–)2014–2015Tylko silnik: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo V70 (2008–)2014–2015Tylko silnik: B4204T11, D4204T5
- Volvo XC60 (2009–)2014–2015Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo XC70 (2008–)2014–2015Tylko silnik: B4204T11, D4204T5
Co oznacza ten kod błędu?
The ECM reads oil pressure through the combined oil pressure and oil temperature sensor. The fault is stored when the module detects an internal fault in the sensor, which means the fault lies in the sensor itself. The module then uses a fixed oil pressure value instead of the measured one.
Możliwe przyczyny
- The combined oil pressure and oil temperature sensor is damaged
Co możesz zrobić
- 1Check that the fuses are intact
- 2Check that the connector to the sensor is firmly seated and not corroded
- 3If you have diagnostic equipment: read the oil pressure in live data with the engine idling and when the revs are raised, and check whether the value changes
- 4Clear the code and road test the car. If the code comes back, the sensor is probably damaged
- 5Have a workshop check the combined oil pressure and temperature sensor and replace it if it is damaged
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Na co może wpływać usterka1
- The control module uses a fixed oil pressure instead of the measured value
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.