VOLVO
ECM-P055F00 - Engine Oil Pressure Out of Range. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (8)
- Volvo S60 (2011–)2014–2015Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo S80 (2007–)2014–2015Tylko silnik: B4204T11, B4204T12, B4204T15, D4204T5
- Volvo V40 (2013–)2015Tylko silnik: B4204T11, D4204T14
- Volvo V40 Cross Country (2013–)2015Tylko silnik: B4204T11, D4204T14
- Volvo V60 (2011–)2014–2015Tylko silnik: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo V70 (2008–)2014–2015Tylko silnik: B4204T11, D4204T5
- Volvo XC60 (2009–)2014–2015Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo XC70 (2008–)2014–2015Tylko silnik: B4204T11, D4204T5
Co oznacza ten kod błędu?
The ECM checks oil pressure with the combined oil pressure and oil temperature sensor. The fault is stored when the module finds that the signal from the sensor is faulty while the engine is running. A fixed oil pressure value is then used instead of the measured one, and the fault may be linked to the oil quality.
Możliwe przyczyny
- The combined oil pressure and oil temperature sensor is damaged
- The engine oil is of poor quality
Co możesz zrobić
- 1Check that the fuses are intact
- 2Check the condition of the oil and which oil quality has been added, as poor oil can be the cause
- 3Check the connector at the sensor for contact resistance and oxidation
- 4If you have diagnostic equipment: read the oil pressure in live data with the engine running and see whether the value behaves abnormally
- 5If the oil is in good condition and the connector is clean, have a workshop check the combined sensor
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Na co może wpływać usterka1
- The control module uses a fixed oil pressure instead of the measured value
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.