VOLVO
ECM-P057800 - Cruise Control Multi-Function Input A Circuit Stuck. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Pokaż modele wg rocznika i silnika (8)
- Volvo S80 (2007–)2007–2009Tylko silnik: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Tylko silnik: D4164T
- Volvo V70 (2008–)2008–2009Tylko silnik: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Tylko silnik: D4164T
- Volvo XC60 (2009–)2009Wszystkie silniki oprócz: B6304T2
- Volvo XC70 (2008–)2008Wszystkie silniki oprócz: B6324S
- Volvo XC70 (2008–)2009Tylko silnik: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Tylko silnik: D5244T18, D5244T5
Co oznacza ten kod błędu?
The ECM receives cruise control information from several other control modules over CAN, including the buttons on the steering wheel. The code is set when the ECM receives a CAN message reporting a fault in the cruise control buttons. The fault can be checked when any of the buttons is used while driving.
Możliwe przyczyny
- A sticking or locked cruise control button
- The message from the cruise control buttons has a wrong checksum
- Damaged cruise control button assembly
- Several buttons activated at the same time
Co możesz zrobić
- 1Check that the fuses are intact
- 2Press the cruise control buttons on the steering wheel one at a time and check that they return fully and do not stick
- 3If you have diagnostic equipment: read the fault status with the engine running and see whether the fault is still active after using the buttons on a safe test drive
- 4Clear the code and road test the car. Check whether it returns when the cruise control buttons are used
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.