Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-P057982
    VOLVO

    ECM-P057982 - Cruise Control Multi-Function Input A Circuit Range/Performance. Bus Signal / Message Failures. Alive / sequence counter incorrect / not updated

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    5 modeli

    S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

    Pokaż modele wg rocznika i silnika (8)
    • Volvo S80 (2007–)2007–2009Tylko silnik: D5244T4, D5244T5
    • Volvo S80 (2007–)2010–2011Tylko silnik: D4164T
    • Volvo V70 (2008–)2008–2009Tylko silnik: D5244T4, D5244T5
    • Volvo V70 (2008–)2010–2011Tylko silnik: D4164T
    • Volvo XC60 (2009–)2009Wszystkie silniki oprócz: B6304T2
    • Volvo XC70 (2008–)2008Wszystkie silniki oprócz: B6324S
    • Volvo XC70 (2008–)2009Tylko silnik: D5244T4, D5244T5
    • Volvo XC90 (2003–)2013–2014Tylko silnik: D5244T18, D5244T5

    Co oznacza ten kod błędu?

    The ECM receives cruise control information over CAN from several control modules, including the buttons on the steering wheel. The fault concerns a counter in the message that is not correct or is not being updated. The code is set when a CAN message reporting a fault in the cruise control buttons arrives.

    Możliwe przyczyny

    • A sticking or locked cruise control button
    • The message from the cruise control buttons has a wrong checksum
    • Damaged cruise control button assembly
    • Several buttons activated at the same time

    Co możesz zrobić

    1. 1Check that the fuses are intact
    2. 2If you have diagnostic equipment: read the fault status with the engine running and see whether the fault is active after a safe test drive using the buttons
    3. 3Press one cruise control button at a time and check that it returns fully
    4. 4Check that the connectors to the steering wheel button assembly are firmly seated and not corroded
    5. 5Clear the code and road test the car to see whether it returns
    6. 6If the fault remains, have a workshop check the cruise control button assembly and the CAN network

    Objawy, które możesz zauważyć1

    • No noticeable symptoms for the driver

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.