VOLVO
ECM-P060662 - Control module processor. Algorithm Based Failures. Signal compare failure
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
11 modeliC30 (2007–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Pokaż modele wg rocznika i silnika (33)
- Volvo C30 (2007–2013)2013Tylko silnik: D4162T
- Volvo S60 (2011–)2011Tylko silnik: B6304T4
- Volvo S60 (2011–)2012Tylko silnik: B6304T4, D4162T
- Volvo S60 (2011–)2013Tylko silnik: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4, D4162T
- Volvo S60 (2011–)2014Wszystkie silniki oprócz: B4164T, B4164T2, B4164T3, B4204T7, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Wszystkie silniki oprócz: B4164T, B4164T2, B4164T3, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2011Tylko silnik: B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2012Tylko silnik: B6304T4, B6324S4, B6324S5, D4162T
- Volvo S80 (2007–)2013Tylko silnik: B5254T12, B5254T14, B6304T4, B6324S4, B6324S5, D4162T
- Volvo S80 (2007–)2014Wszystkie silniki oprócz: B4164T, B4164T2, B4204T6, B4204T7, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Wszystkie silniki oprócz: B4164T, D5204T3, D5244T15
- Volvo V40 (2013–)2013Wszystkie silniki oprócz: B4164T, B4164T3, D5204T4, D5204T6
- Volvo V40 (2013–)2014Tylko silnik: B5204T8, B5204T9, B5254T12, B5254T14, D4162T
- Volvo V40 (2013–)2015Wszystkie silniki oprócz: B4164T, B4164T3, B4164T4, D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Wszystkie silniki oprócz: B4164T, D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Wszystkie silniki oprócz: B4164T, D5204T6
- Volvo V60 (2011–)2011Tylko silnik: B6304T4
- Volvo V60 (2011–)2012Tylko silnik: B6304T4, D4162T
- Volvo V60 (2011–)2013Tylko silnik: B5204T8, B5204T9, B6304T4, D4162T
- Volvo V60 (2011–)2014Tylko silnik: B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B6304T4, D4162T, D4204T5
- Volvo V60 (2011–)2015Tylko silnik: B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5, D4162T, D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2011Tylko silnik: B6304T4, B6324S5
- Volvo V70 (2008–)2012Tylko silnik: B6304T4, B6324S5, D4162T
- Volvo V70 (2008–)2013Tylko silnik: B5204T9, B6304T4, B6324S5, D4162T
- Volvo V70 (2008–)2014Tylko silnik: B4204T11, B5204T9, B6304T4, B6324S5, D4162T, D4204T5
- Volvo V70 (2008–)2015Tylko silnik: B4204T11, B5204T9, B6304T4, D4162T, D4204T5
- Volvo XC60 (2009–)2011–2013Tylko silnik: B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Wszystkie silniki oprócz: B4204T7, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015Wszystkie silniki oprócz: B4204T7, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2011–2013Tylko silnik: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Tylko silnik: B4204T11, B6304T4, B6324S4, B6324S5, D4204T5
- Volvo XC90 (2003–)2011–2014Tylko silnik: B6324S5
Co oznacza ten kod błędu?
The ECM continuously compares internal signals with each other, and the code is set when the comparison gives impermissible results with the engine running. The code may be a consequence of a fault related to the throttle. In that case the throttle fault should be repaired first, after which the code can be cleared.
Możliwe przyczyny
- Fault related to the throttle, where this code is set as a result of that fault
- Poorly charged battery or corroded connection cables
- Damaged software in the ECM
- Damaged ECM
Co możesz zrobić
- 1If another code relates to the throttle, repair that one first, because this code is then a consequence of it
- 2Check the battery charge and that the battery terminals and earth connections are tight and clean
- 3Check that the connectors at the battery and the ECM are tight and free from corrosion
- 4Clear the code and road test the car with the engine running to see whether it comes back
- 5If the fault comes back, have a workshop reload the software in the ECM. If that does not help, the module needs replacing
Objawy, które możesz zauważyć5
- Malfunction indicator lamp (check engine) comes on or behaves abnormally
- The engine runs poorly and lacks power, especially when pulling away from a standstill
- The engine hesitates, surges or runs roughly during acceleration or deceleration
- The engine hesitates, surges or runs roughly at constant speed
- The problems may be present all the time or only now and then
Na co może wpływać usterka1
- Some internal signals in the ECM are replaced by default values
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.