VOLVO
ECM-P060C00 - Internal Control Module Main Processor Performance. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
2 modeleS80 (2007–), V70 (2008–)
Co oznacza ten kod błędu?
The ECM drives the injectors through its own output stages and monitors the signal during injection. The code is set when the module finds a wrong signal in the injector circuit with the engine running. The code does not state a more specific fault type.
Możliwe przyczyny
- Loose contact, or contact resistance and oxidation in the connections
- Signal wire shorted to earth or voltage
- Injector return line damaged or blocked
- Injector sticking or jammed
- Damaged injector
- Damaged ECM
Co możesz zrobić
- 1Read the code, clear it and road test the car to see whether it comes back
- 2Check that the connectors at the injectors and the ECM are tight and free from corrosion
- 3If you have a multimeter: check that the injector wiring is not shorted to earth or voltage
- 4If you have a diagnostic tool: activate the injectors one at a time and see whether any of them does not respond
- 5If the fault comes back, have a workshop check the return line and replace the injectors or the module as needed
Objawy, które możesz zauważyć2
- Warning symbol and message in the display
- The car feels weak and lacks power
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.