Co oznacza kod błędu ECM-P061161?

Diagnostyka i definicja kodu błędu dla ECM-P061161 (Volvo S80 (2007–), Volvo S80 (2007–), Volvo V70 (2008–)). Zamów naprawę w OBD Tuning.

VOLVO

ECM-P061161 - Fuel Injector Control Module Performance. Algorithm Based Failures. Signal calculation failure

Układ

Sterownik silnika (ECM)

Modele Volvo, których dotyczy ten kod błędu

Dotyczy następujących modeli:

5 modeli

S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

Pokaż modele wg rocznika i silnika (8)

Co oznacza ten kod błędu?

The ECM registers that the fuel injection has been limited, and the code is set when this happens with the engine running. The fault is a wrong calculation, and the cause may lie in the turbo control, the fuel control or the software.

Możliwe przyczyny

Fault in the turbo control
If ECM-P061162 is also stored: fault in the fuel control
If ECM-P061164 is also stored: fault in the software

Co możesz zrobić

1Any other fault codes in the ECM should be dealt with first
2Check that the hoses between the air flow meter and the turbo are intact and secure, and look for air leaks
3Check that the hoses between the turbo and the inlet pipe are intact and secure, and look for air leaks
4Look for clear fuel leaks in the fuel system
5If the fault comes back, have a workshop check the turbo control and the engine control module

Objawy, które możesz zauważyć4

The car feels weak and lacks power, especially when pulling away from a standstill
The engine hesitates, surges or runs roughly during acceleration or deceleration
The engine hesitates, surges or runs roughly at constant speed
The problems may be present all the time or only now and then

Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.