ECM-P061613
VOLVO
ECM-P061613 - Starter Relay Circuit Low. General Electrical Failures. Circuit open
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)
Pokaż modele wg rocznika i silnika (20)
- Volvo S60 (2011–)2011Tylko silnik: B4204T6, B4204T7, B5254T5
- Volvo S60 (2011–)2012Tylko silnik: B4204T7, B5254T5
- Volvo S60 (2011–)2013–2014Tylko silnik: B4204T7
- Volvo S80 (2007–)2007–2008Tylko silnik: B5254T6
- Volvo S80 (2007–)2009Tylko silnik: B5254T6, B5254T8
- Volvo S80 (2007–)2010Tylko silnik: B4204T6, B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2011Tylko silnik: B4204T6, B4204T7, B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Tylko silnik: B4204T6, B4204T7, B5254T10
- Volvo S80 (2007–)2013–2014Tylko silnik: B4204T6, B4204T7
- Volvo V60 (2011–)2011Tylko silnik: B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Tylko silnik: B4204T7
- Volvo V70 (2008–)2008Tylko silnik: B5254T6
- Volvo V70 (2008–)2009Tylko silnik: B5254T6, B5254T8
- Volvo V70 (2008–)2010Tylko silnik: B4204T6, B5254T10, B5254T11
- Volvo V70 (2008–)2011Tylko silnik: B4204T6, B4204T7, B5254T10, B5254T11
- Volvo V70 (2008–)2012Tylko silnik: B4204T7, B5254T10
- Volvo V70 (2008–)2013–2014Tylko silnik: B4204T7
- Volvo XC60 (2009–)2010Tylko silnik: B4204T6
- Volvo XC60 (2009–)2011–2012Tylko silnik: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Tylko silnik: B4204T7
Co oznacza ten kod błędu?
The ECM checks the signal from the starter relay through the earth wire, and the code is set when the signal is missing or wrong. The code indicates an open circuit, meaning a break, and the fault may lie in the earth wire between the module and the starter relay or in the relay itself.
Możliwe przyczyny
- Break in the earth wire between the ECM and the starter relay
- Internal fault in the starter relay
Co możesz zrobić
- 1Check the battery charge and that the battery terminals and earth connections are tight and clean
- 2If you have a multimeter: check that the earth wire between the ECM and the starter relay has no break
- 3Check the connections and wiring between the ECM and the starter relay for breaks and loose contacts
- 4If the fault cannot be found, have a workshop try a new starter relay
Objawy, które możesz zauważyć3
- Auto start does not work
- The starter motor does not turn
- The engine does not start, either always or only sometimes, and the starter motor does not crank
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.