VOLVO
ECM-P061C47 - Internal Control Module Engine RPM Performance. System Internal Failures. Watchdog / safety µC failure
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
7 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Pokaż modele wg rocznika i silnika (20)
- Volvo S60 (2011–)2011Tylko silnik: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Tylko silnik: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Tylko silnik: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Tylko silnik: B4204T6
- Volvo S80 (2007–)2011Tylko silnik: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Tylko silnik: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Tylko silnik: B4164T
- Volvo V40 (2013–)2013Tylko silnik: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Tylko silnik: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Tylko silnik: B4164T
- Volvo V60 (2011–)2011Tylko silnik: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Tylko silnik: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Tylko silnik: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Tylko silnik: B4204T6
- Volvo V70 (2008–)2011Tylko silnik: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Tylko silnik: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Tylko silnik: B4164T, B4164T2
- Volvo XC60 (2009–)2010Tylko silnik: B4204T6
- Volvo XC60 (2009–)2011–2012Tylko silnik: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Tylko silnik: B4204T7
Co oznacza ten kod błędu?
Although the fault code is named as a safety fault in the processor, the condition is that the engine control module's internal monitoring has registered faulty speed monitoring. The causes are mainly the impulse sensor and the camshaft sensor with their wiring, or the control module itself. Engine output may be limited while the fault is active.
Możliwe przyczyny
- Poor contact (raised contact resistance) or a break in the wiring to the impulse sensor
- Raised contact resistance or a break in the wiring to the camshaft sensor
- Damaged impulse sensor or damaged camshaft sensor
- Internal fault or damage in the engine control module (ECM)
Co możesz zrobić
- 1Check that the fuses are intact
- 2With the ignition on, check the connectors at the impulse sensor and the camshaft sensor for contact resistance and oxidation
- 3Look for chafed or broken wiring to the impulse sensor and the camshaft sensor
- 4After the repair: read the diagnostic status and fault status with a diagnostic tool. The fault should be gone once the diagnosis is complete
- 5If the fault remains: have a workshop read the engine control module with diagnostic equipment
Objawy, które możesz zauważyć4
- The engine lacks power
- The engine hesitates, surges or runs jerkily, sometimes or all the time
- The check engine lamp lights or behaves abnormally
- Text message and warning symbol in the display
Na co może wpływać usterka1
- Engine output is limited
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.