VOLVO
ECM-P062D00 - Fuel Injector Driver Circuit Performance Bank 1. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
12 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (41)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Tylko silnik: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Wszystkie silniki oprócz: B5254T7
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011Tylko silnik: D4162T, D5204T2, D5244T10
- Volvo S60 (2011–)2012Tylko silnik: D4162T, D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013–2014Tylko silnik: D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Tylko silnik: D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2009Tylko silnik: D5244T10
- Volvo S80 (2007–)2010Tylko silnik: D5244T10, D5244T14, D5244T19
- Volvo S80 (2007–)2011Tylko silnik: D5204T2, D5244T10
- Volvo S80 (2007–)2012Tylko silnik: D4162T, D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013–2014Tylko silnik: D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Tylko silnik: D4162T, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Tylko silnik: D4162T, D5204T4, D5204T6
- Volvo V40 (2013–)2015Tylko silnik: D4162T, D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Tylko silnik: D4162T, D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Tylko silnik: D4162T, D5204T6
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011Tylko silnik: D4162T, D5204T2, D5244T10
- Volvo V60 (2011–)2012Tylko silnik: D4162T, D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013Tylko silnik: D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2014Tylko silnik: D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2015Tylko silnik: D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23, D82PHEV, D87PHEV
- Volvo V70 (2008–)2009Tylko silnik: D5244T10
- Volvo V70 (2008–)2010Tylko silnik: D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2011Tylko silnik: D5204T2, D5244T10
- Volvo V70 (2008–)2012Tylko silnik: D4162T, D5204T3, D5244T11, D5244T15
- Volvo V70 (2008–)2013Tylko silnik: D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T17
- Volvo V70 (2008–)2014Tylko silnik: D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo V70 (2008–)2015Wszystkie silniki oprócz: B4164T, B4164T2, B4204T11, B5204T9, B6304T4, D4204T5
- Volvo XC60 (2009–)2010Tylko silnik: D5244T10, D5244T14, D5244T16
- Volvo XC60 (2009–)2011Tylko silnik: D5204T2, D5244T10, D5244T16
- Volvo XC60 (2009–)2012Tylko silnik: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013Wszystkie silniki oprócz: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Tylko silnik: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015Tylko silnik: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2010Tylko silnik: D5244T10, D5244T14, D5244T16
- Volvo XC70 (2008–)2011Tylko silnik: D5204T2, D5244T10, D5244T16
- Volvo XC70 (2008–)2012–2013Wszystkie silniki oprócz: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Tylko silnik: D5204T3, D5244T11, D5244T12, D5244T15, D5244T17
Co oznacza ten kod błędu?
The control module keeps watch over the fuel injection system, including the integrated end stages for the injectors and their injection volume. The fault code is set when an error occurs in the internal voltage conversion of the module or when the injection time is wrong. The fault can make the engine hard to start or cause hesitation.
Możliwe przyczyny
- A fault inside the engine control module (ECM)
- Loose connections, or contact resistance and oxidation in the terminals
- Open circuit in the signal wire (+) or in the signal wire (-)
- Damaged injector
Co możesz zrobić
- 1Check that the fuses are intact
- 2With the ignition on, check the connectors at the injectors for looseness, contact resistance and oxidation
- 3With a multimeter, check that the signal wires to the injectors have no break
- 4If you have a diagnostic tool: read the fault status after the repair and see whether it has cleared when the test is complete
- 5If the fault remains: have a workshop check the injectors and the engine control module with diagnostic equipment
Objawy, które możesz zauważyć5
- Text message and warning symbol in the display
- The engine does not start, but the starter motor turns
- The engine is hard to start and the starter motor cranks slowly, especially on a cold start
- The engine lacks power, especially when pulling away from standstill
- The engine hesitates, surges or runs jerkily during acceleration, deceleration or steady speed, sometimes or all the time
Na co może wpływać usterka1
- Engine speed may be limited
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.