VOLVO
ECM-P062D01 - Fuel Injector Driver Circuit Performance Bank 1. General Failure Information. General electrical failure
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (28)
- Volvo S60 (2011–)2011Tylko silnik: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2013Tylko silnik: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2014Tylko silnik: B4164T, B4164T2, B4164T3, B4204T10, B4204T11, B4204T12, B4204T15, B4204T7, B4204T9
- Volvo S60 (2011–)2015Tylko silnik: B4164T, B4164T2, B4164T3, B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo S80 (2007–)2010Tylko silnik: B4204T6
- Volvo S80 (2007–)2011Tylko silnik: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2013Tylko silnik: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2014Tylko silnik: B4164T, B4164T2, B4204T11, B4204T12, B4204T15, B4204T6, B4204T7
- Volvo S80 (2007–)2015Tylko silnik: B4164T, B4204T11, B4204T12, B4204T15
- Volvo V40 (2013–)2013Tylko silnik: B4164T, B4164T3
- Volvo V40 (2013–)2014Tylko silnik: B4164T, B4164T3, B4164T4
- Volvo V40 (2013–)2015Tylko silnik: B4164T, B4164T3, B4164T4, B4204T11
- Volvo V40 Cross Country (2013–)2013–2014Tylko silnik: B4164T
- Volvo V40 Cross Country (2013–)2015Tylko silnik: B4164T, B4204T11
- Volvo V60 (2011–)2011Tylko silnik: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2013Tylko silnik: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2014Tylko silnik: B4164T, B4164T2, B4164T3, B4204T11, B4204T12, B4204T15, B4204T7, B4204T9
- Volvo V60 (2011–)2015Tylko silnik: B4164T, B4164T2, B4164T3, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo V70 (2008–)2010Tylko silnik: B4204T6
- Volvo V70 (2008–)2011Tylko silnik: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2013Tylko silnik: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2014Tylko silnik: B4164T, B4164T2, B4204T11, B4204T7
- Volvo V70 (2008–)2015Tylko silnik: B4164T, B4164T2, B4204T11
- Volvo XC60 (2009–)2010Tylko silnik: B4204T6
- Volvo XC60 (2009–)2011–2012Tylko silnik: B4204T6, B4204T7
- Volvo XC60 (2009–)2013Tylko silnik: B4204T7
- Volvo XC60 (2009–)2014–2015Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T7, B4204T9
- Volvo XC70 (2008–)2014–2015Tylko silnik: B4204T11
Co oznacza ten kod błędu?
The engine control module checks the current signal to the injectors. The fault code is set when the current signal is too low compared with what has been requested. Although the fault code is named as a general electrical fault, the condition concerns the current signal to the injectors, which can be weakened by poor contact at the injectors or by a damaged control module.
Możliwe przyczyny
- Contact resistance or oxidation in the connections
- Damaged engine control module (ECM)
- Internal fault in the control module
Co możesz zrobić
- 1With the ignition off, check the connectors at the injectors for contact resistance and oxidation
- 2Have a workshop measure the internal resistance of the injectors to rule out a damaged injector
- 3If the fault remains: have a workshop with diagnostic equipment check the engine control module
Objawy, które możesz zauważyć3
- The engine does not start, sometimes or all the time
- The engine is hard to start and the starter motor cranks slowly, sometimes or all the time
- The check engine lamp lights or behaves abnormally
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.