VOLVO
ECM-P062D04 - Fuel Injector Driver Circuit Performance Bank 1. General Failure Information. System Internal Failures
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Pokaż modele wg rocznika i silnika (16)
- Volvo S60 (2011–)2014–2015Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo S80 (2007–)2007–2009Tylko silnik: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Tylko silnik: D4164T
- Volvo S80 (2007–)2014–2015Tylko silnik: B4204T11, B4204T12, B4204T15
- Volvo V40 (2013–)2015Tylko silnik: B4204T11
- Volvo V40 Cross Country (2013–)2015Tylko silnik: B4204T11
- Volvo V60 (2011–)2014–2015Tylko silnik: B4204T11, B4204T12, B4204T15, B4204T9
- Volvo V70 (2008–)2008–2009Tylko silnik: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Tylko silnik: D4164T
- Volvo V70 (2008–)2014–2015Tylko silnik: B4204T11
- Volvo XC60 (2009–)2009Wszystkie silniki oprócz: B6304T2
- Volvo XC60 (2009–)2014–2015Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo XC70 (2008–)2008Wszystkie silniki oprócz: B6324S
- Volvo XC70 (2008–)2009Tylko silnik: D5244T4, D5244T5
- Volvo XC70 (2008–)2014–2015Tylko silnik: B4204T11
- Volvo XC90 (2003–)2013–2014Tylko silnik: D5244T18, D5244T5
Co oznacza ten kod błędu?
The engine control module has built-in control systems that detect internal faults. If the monitoring registers a temporary fault in the injectors' control system, the fault code is set, and with an active fault the fuel supply is shut off. The fault can cause the engine not to start or to lack power.
Możliwe przyczyny
- Signal interference
- System voltage too low
- Damaged injection valves
- Software error
- Communication problems
- Internal fault in the control module
Co możesz zrobić
- 1With the ignition on, read the diagnostic status and fault status for the code
- 2Check that the fuses are intact
- 3After the test, see whether the fault is still present
- 4Have a workshop check that the control module's software is up to date
- 5If the fault remains: have a workshop check the injection valves and the control module with diagnostic equipment
Objawy, które możesz zauważyć4
- The engine does not start, sometimes or all the time
- The engine lacks power
- The engine stalls on starting
- The check engine lamp lights or behaves abnormally
Na co może wpływać usterka1
- Fuel supply is shut off while the fault is active
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.