VOLVO
ECM-P063087 - VIN Not Programmed or Incompatible - ECM/PCM. Bus Signal / Message Failures. Missing message
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Pokaż modele wg rocznika i silnika (9)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T
- Volvo S60 (2011–)2011–2015Tylko silnik: D4162T
- Volvo S80 (2007–)2012–2015Tylko silnik: D4162T
- Volvo V40 (2013–)2013–2015Tylko silnik: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Tylko silnik: D4162T
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T
- Volvo V60 (2011–)2011–2015Tylko silnik: D4162T
- Volvo V70 (2008–)2012–2015Tylko silnik: D4162T
Co oznacza ten kod błędu?
The code concerns the vehicle configuration that the engine control module (ECM) should receive from the central electronic module (CEM). It indicates that the message carrying the configuration is missing on the bus between the two modules, or that the information received is incorrect. The ECM compares the configuration from the CEM with the one it has stored, and the code is set when they are incorrect or do not match. The check starts when the ignition is switched on.
Możliwe przyczyny
- A control module from another vehicle has been fitted
- Faulty software
- A fault in the central electronic module (CEM), which should be traced
Co możesz zrobić
- 1Read the code, clear it and road test the car to see whether it returns
- 2Check that the central electronic module (CEM) and the engine control module have secure connections, and look for loose or corroded connectors or chafed wiring between them
- 3Check whether a control module from another vehicle has been fitted, since the code is then set
- 4Trace faults in the central electronic module (CEM); if the connectors and wiring are intact, have a workshop check the configuration in the engine control module
Objawy, które możesz zauważyć1
- Warning symbol and text message in the display
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.