VOLVO
ECM-P065200 - Sensor Reference Voltage B Circuit Low. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Ten kod błędu ma różne znaczenie w zależności od modelu, rocznika lub silnika. Wybierz znaczenie, które dotyczy Twojego samochodu.
Dotyczy następujących modeli:
11 modeliC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (29)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T
- Volvo S60 (2011–)2011–2012Tylko silnik: B5254T5, D4162T
- Volvo S60 (2011–)2013Tylko silnik: D4162T
- Volvo S60 (2011–)2014–2015Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4162T
- Volvo S80 (2007–)2007Tylko silnik: B5254T6
- Volvo S80 (2007–)2008Tylko silnik: B5254T6, D4204T
- Volvo S80 (2007–)2009Tylko silnik: B5254T6, B5254T8, D4204T
- Volvo S80 (2007–)2010Tylko silnik: B5254T10, B5254T11, B5254T8, D4204T
- Volvo S80 (2007–)2011Tylko silnik: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Tylko silnik: B5254T10, D4162T
- Volvo S80 (2007–)2013Tylko silnik: D4162T
- Volvo S80 (2007–)2014–2015Tylko silnik: B4204T11, B4204T12, B4204T15, D4162T
- Volvo V40 (2013–)2013–2014Tylko silnik: D4162T
- Volvo V40 (2013–)2015Tylko silnik: B4204T11, D4162T
- Volvo V40 Cross Country (2013–)2013–2014Tylko silnik: D4162T
- Volvo V40 Cross Country (2013–)2015Tylko silnik: B4204T11, D4162T
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T
- Volvo V60 (2011–)2011–2013Tylko silnik: D4162T
- Volvo V60 (2011–)2014–2015Tylko silnik: B4204T11, B4204T12, B4204T15, B4204T9, D4162T
- Volvo V70 (2008–)2008Tylko silnik: B5254T6, D4204T
- Volvo V70 (2008–)2009Tylko silnik: B5254T6, B5254T8, D4204T
- Volvo V70 (2008–)2010Tylko silnik: B5254T10, B5254T11, D4204T
- Volvo V70 (2008–)2011Tylko silnik: B5254T10, B5254T11
- Volvo V70 (2008–)2012Tylko silnik: B5254T10, D4162T
- Volvo V70 (2008–)2013Tylko silnik: D4162T
- Volvo V70 (2008–)2014–2015Tylko silnik: B4204T11, D4162T
- Volvo XC60 (2009–)2014–2015Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo XC70 (2008–)2014–2015Tylko silnik: B4204T11
Co oznacza ten kod błędu?
Reference voltage B is too low. The ECM checks the internal supply circuits for the components and sets the code when the voltage in one of them is abnormal. The cause may be wiring, a sensor, the battery or the charging system, but also the engine control module itself.
Możliwe przyczyny
- Voltage cable to the sensor shorted to ground or supply voltage
- Damaged sensor
- Damaged engine control module (ECM)
- Battery voltage too low, or a damaged battery
- Fault in the charging system
Co możesz zrobić
- 1If a fault code for a sensor connected to the supply is stored, trace that one first
- 2Check the battery condition and that the charging system works, and remedy as needed
- 3Check that the fuses are intact and that the connectors to the sensors are secure
- 4Use a multimeter to check that the wires to the sensors are not shorted to ground or supply voltage
- 5If the battery, charging and wiring are in order but the fault remains, have a workshop check the engine control module
Objawy, które możesz zauważyć5
- The car performs poorly and lacks power, especially at take-off
- The engine misfires or stalls while driving
- The engine is difficult to start, the starter motor does not turn or turns but the engine does not start
- The engine hesitates or surges during acceleration, during deceleration or at steady speed
- Warning symbol and text message in the display
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.