VOLVO
ECM-P065A07 - Generator System Performance. General Failure Information. Mechanical Failures
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Pokaż modele wg rocznika i silnika (26)
- Volvo S60 (2011–)2011Tylko silnik: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Tylko silnik: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Tylko silnik: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2007–2009Tylko silnik: D5244T4, D5244T5
- Volvo S80 (2007–)2010Tylko silnik: B4204T6, D4164T
- Volvo S80 (2007–)2011Tylko silnik: B4164T, B4204T6, B4204T7, D4164T
- Volvo S80 (2007–)2012–2014Tylko silnik: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Tylko silnik: B4164T
- Volvo V40 (2013–)2013Tylko silnik: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Tylko silnik: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Tylko silnik: B4164T
- Volvo V60 (2011–)2011Tylko silnik: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Tylko silnik: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Tylko silnik: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2008–2009Tylko silnik: D5244T4, D5244T5
- Volvo V70 (2008–)2010Tylko silnik: B4204T6, D4164T
- Volvo V70 (2008–)2011Tylko silnik: B4164T, B4204T6, B4204T7, D4164T
- Volvo V70 (2008–)2012–2014Tylko silnik: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Tylko silnik: B4164T, B4164T2
- Volvo XC60 (2009–)2009Wszystkie silniki oprócz: B6304T2
- Volvo XC60 (2009–)2010Tylko silnik: B4204T6
- Volvo XC60 (2009–)2011–2012Tylko silnik: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Tylko silnik: B4204T7
- Volvo XC70 (2008–)2008Wszystkie silniki oprócz: B6324S
- Volvo XC70 (2008–)2009Tylko silnik: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Tylko silnik: D5244T18, D5244T5
Co oznacza ten kod błędu?
The code concerns mechanical faults in the generator system, and it is set when the engine control module (ECM) receives fault information from the alternator control module (ACM) or the communication between the two is faulty. The check can be carried out with the engine running.
Możliwe przyczyny
- Damaged auxiliary drive belt and belt tensioner
- Damaged freewheel
- Related fault code ECM-P065A01; trace it according to that code
- Related fault code ECM-P0A3B00; ambient temperature too high
- Related fault code ECM-P163287; open circuit in the signal wire
Co możesz zrobić
- 1With the ignition off, check the auxiliary drive belt and the belt tensioner for damage
- 2Have a workshop check that the alternator freewheel works
- 3Check that the fuses are intact and that the connectors in the charging system are secure
- 4If you have diagnostic equipment, read the alternator's charging current in live data with the engine running
Objawy, które możesz zauważyć3
- The battery is dead
- The battery has low voltage
- The charging warning light comes on or behaves abnormally
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.