VOLVO
ECM-P066E00 - Cylinder 3 Glow Plug Control Circuit Low. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (8)
- Volvo S60 (2011–)2014–2015Tylko silnik: D4204T5
- Volvo S80 (2007–)2014–2015Tylko silnik: D4204T5
- Volvo V40 (2013–)2015Tylko silnik: D4204T14
- Volvo V40 Cross Country (2013–)2015Tylko silnik: D4204T14
- Volvo V60 (2011–)2014–2015Tylko silnik: D4204T5
- Volvo V70 (2008–)2014–2015Tylko silnik: D4204T5
- Volvo XC60 (2009–)2014–2015Tylko silnik: D4204T5
- Volvo XC70 (2008–)2014–2015Tylko silnik: D4204T5
Co oznacza ten kod błędu?
The code concerns the control circuit of glow plug 3 in cylinder 3, where the signal is too low. The ECM drives the glow plugs through the glow plug control module and sets the code when it detects a fault on glow plug 3.
Możliwe przyczyny
- Poor contact or oxidation in the connectors
- Signal wire shorted to ground
- Damaged glow plug control unit
Co możesz zrobić
- 1Check that the fuses are intact and that the relevant functions of the car work
- 2With the ignition off, check the connectors at the glow plug control module and at glow plug 3 for contact resistance and oxidation
- 3Use a multimeter to check that the signal wire to glow plug 3 is not shorted to ground
- 4If the connectors and wire are intact but the fault remains, have a workshop check glow plug 3 and the glow plug control module
Objawy, które możesz zauważyć3
- The engine is hard to start and cranks slowly, at times or all the time
- The engine is hard to start and cranks slowly after use
- The engine is hard to start and cranks slowly on a cold start
Na co może wpływać usterka1
- Glowing is shut off for the damaged glow plug
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.